Will the Screen Defender and Screen Shot Worth Together On a 30" Lippert Screen Door

Question

Question:

Will the Lippert screen door defender work in conjunction with the Lippert screen shot door closer? I would like to add both to my 30 inch Lippert screen door.

asked by: Tom B

1

Helpful Expert Reply:

The Screen Defender Screen Protector part # LC92FR and Screen Shot Automatic Screen Door Closer part # LC730815 both mount in the same location so they most likely won't work well together. Therefore, you will need to choose between one or the other.

expert reply by: Conner L

1

Wick W.

7/11/2025

Even if the spare filler panels are not used ? That should allow plenty of space to fit the screen in…

Nick S.

7/11/2025

@WickW I don't have a way of confirming if it will. Since they mount in the same location they most likely will not work together for that reason. How much room do you have in the area it would be installed on?

Wick W.

7/11/2025

@NickS Enough room for the 4”extra insert panel if the SS wasn’t there . If the screen only pops into the tracks with the bottom tabs at the very bottom of the screen then I see no reason that Only the screen protector without the filler panels wouldn’t work ! I just want to make sure before I purchase one :)

Nick S.

7/11/2025

@WickW The more I look at it, the more I agree with you, There shouldn't be an issue using both if the side panel is not used. It is difficult when they install in the same area to know 100%, since we haven't been able to try that out, but looking at both I think it will workout for you. Especially with the gap you have.

See All (6) Replies to Wick W. ∨

Answer 1

The skid wheels would typically weld to the underside of the RV frame. Using skid wheels would be advantageous because it would help prevent the RV undercarriage from scraping against obstructions like speed bumps. Instead, the wheel would hit the…

view full answer...

Answer 2

Hey Kyle, thanks for reaching out! The screen you're seeing behind the photos we have of the Lippert Screen Door Slider Panel #LC239061 aren't something that we carry, but as I'm looking at the photos, the screen looks like it installs…

view full answer...

Answer 3

Hey Ed, it sounds like you are looking for an RV entry door hinge like the part #LC95VR. This is one that all is designed to stop the door from slamming around. Is this what you were looking for?

view full answer...

Answer 4

The correct way to determine if this protector will fit your door is to measure the width of your door frame from edge to edge and round up to the nearest even number. So if you have a 27" door rounded up to the next even number the Screen…

view full answer...

Answer 5

You will need the 30" Screen Defender Screen Protector for Lippert RV Entry Doors #LC92FR with your door frame measurements.

view full answer...

Answer 6

The Screen Defender Screen Protector for Lippert RV Entry Doors #LC92FR is only designed to fit 24", 26", 28", and 30" door sizes and will not fit odd-number sized doors. The LC92FR in particular is designed for 30" door…

view full answer...

Answer 7

In order to replace the spring loaded bolts inside the plastic mounting brackets for the Lend-a-Hand Folding Grab Handle #AM-300 you will need to first remove the handle from your trailer/RV. You can do this by unscrewing the 2 bolts that are…

view full answer...

Answer 8

I can tell you how to determine the fit of Lippert's Screen Defender Screen Protector, but we don't have any way of knowing what door size you have. So all you have to do measure the entire width of your door frame, and round up to the…

view full answer...

Answer 9

I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z…

view full answer...