Does the DrawTite Hitch Interfere with the Hands Free Liftgate on my 2020 Mazda CX9 Hitch

Question

Question:

Im trying to confirm if adding a hitch to a Mazda CX9 disables the hands free liftgate feature. On the Mazda site it says yes, however somebody asked the same question previously here and you replied no. Is this simply because of the different design between the two hitches? If I understand your previous reply correctly the hitch may block the center of the sensor but if you kick on the sides it should still work?

asked by: JEFF K

0

Expert Reply:

You are correct! We have had good success with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76020 and the hands free liftgate operation. As stated it will block the very center where the larger portion of the hitch is but on each side it still registers.

Check out the attached installation video for details. It is on a 2019 but will give you the same information.

expert reply by: Randy B

0

Answer 1

The Draw-Tite Class III hitch for a 2018 Mazda CX-9 is part #76020. If you'll be towing with the hitch, you'll also need a trailer wiring harness like #118278 a ballmount like #2753 and a trailer ball like #19260 for a 1-7/8 or #63845 for a 2…

view full answer...

Answer 2

You will still be able to use the hands free lift gate feature on your 2021 Mazda CX-9 with the Curt Trailer Hitch Receiver #C13284 installed, but you will need to put your foot on either side of the receiver and move it in and out until you find the…

view full answer...

Answer 3

To add a class III hitch to your 2023 Mazda CX-9 you will want the Draw-Tite Trailer hitch item #76020. This hitch is custom fit and attaches to your Mazda with included hardware. I verified with Draw-Tite that this hitch will fit the 2023 models.…

view full answer...

Answer 4

We have the perfect trailer hitch that is confirmed to fit your 2023 Mazda CX-9! The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 has an easy, bolt-on installation with no welding required. It has a black powder coated finish that covers an…

view full answer...

Answer 5

When we installed the Draw Tite hitch part #76020 on a 2016 Mazda CX-9 we found that there was a distance of 6 inches from the center of the hitch pin hole out to the furthest point out on the rear bumper. We used to carry the Yakima SwingDaddy that…

view full answer...

Answer 6

The distance from the center pinhole of Draw-Tite Max-Frame Trailer Hitch Receiver #76020 to the end of your 2019 Mazda CX-9 bumper will be about 7 inches. Fortunately, most trailer hitch bike racks have extra length on the shank to ensure that you…

view full answer...

Answer 7

The hands-free liftgate on your 2021 Mazda CX-9 will not be affected after installing the Curt Trailer Hitch Receiver #C13284.

view full answer...

Answer 8

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Does the DrawTite Hitch Interfere with the Hands Free Liftgate on my 2020 Mazda CX9 Hitch

Featured Help Information

Miscellaneous Media

Continue Researching