Replacement Hitch Pin for XPORT FlatbedLR 2 Bike Rack

Question

Question:

Im looking for a locking pin. The thread on my rack is a standard 1/2 13 thread. None of your description show any threa measurements. From the looks of it the SA3002 might work, I just need to know the thrad measurement. Thanks,

asked by: Rick F

0

Expert Reply:

Typically the threads on the locking pins that come with bike racks are proprietary, so each company is going to have a different thread pitch that is designed to work on the shanks of their bike racks. From some previous customers we've determined that you should be able to use Hollywood Racks part # HRLHPTC, which is a set of hitch and cable locks that includesa 1/2-inch diameter threaded hitch pin with the same thread pitch as the Xport part. This hitch pin is not sold separately, so you would need to purchase the entire package just to get the pin.

expert reply by: Erik B

0

Answer 1

We do not carry the Xport brand here at etrailer but I did speak to my contact at Hollywood Racks who is familiar with the low-cost Xport racks and he advised that there is a Hollywood Racks replacement part that should work for your platform…

view full answer...

Answer 2

Thanks for your patience! I just heard back from Swagman and their Replacement Locking Knob for Swagman Roof Mounted, Upright Bike Carrier item #P1030 has 18 UNC threading.

view full answer...

Answer 3

Yes, the Hollywood Racks Threaded Hitch Lock for 2" Hitches #HRLHPT is 1/2"-13 TPI.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Hey Howard, thanks for reaching out! The Replacement Touch Screen Control Panel #LC83VR could potentially work for you, but I'll need to know what model Ground Control you have. I tried emailing you the other day but I hadn't received…

view full answer...

Replacement Hitch Pin for XPORT FlatbedLR 2 Bike Rack

Product Page this Question was Asked From

Continue Researching