Replacement Waste Cable for RV Black Water Tank

Question

Question:

I was just curious if there is a way to adjust the amount of pull the tank valves have? I have one on our new jayco that pulls out of the guide the handle sits in. I have attached a pic of it.

asked by: Cody F

0

Expert Reply:

It actually looks like the cable on your tank valve is broken, which is why you're getting the extra cable pulled out there in the photo. It looks like what would typically hold that cable handle in place has been stripped out possibly. I'd open it up and see what's going on back there, but in all likelihood you need to replace the cable with something like the Valterra Waste Valve Cable # TC120PB which is a 120" long cable. These do come in a pretty good selection of lengths so I've linked the other available options to this answer as well.

expert reply by: Erik B

0

click to enlarge

Answer 1

First, I do not recommend using WD40 or similar spray lubricants because they can attach dirt and debris and actually make the problem worse. Use a lithium grease (which is available in a spray) or chassis oil for moving parts that do not have a…

view full answer...

Answer 2

I reached out to the manufacturer about this question and they replied, when the EZ Electric Valve is activated, it is fully open or fully closed. There is no way to throttle the flow. However, this unit, the Valterra EZ Valve Electric Waste Valve…

view full answer...

Answer 3

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries. There isn't a way to convert what you have to work with lithium batteries.

view full answer...

Answer 4

The only hose we have with the right connector for the B&B Nautilus P4 RV Water Control Panel item #BM54GR is the B&B 15' Coil Water Hose with 1/4" Quick Connect - Blue item #BM67MR.

view full answer...

Answer 5

Since the placement of the blank waste valve handle makes it hard to operate I recommend switching out the valve with a cable actuated valve that will allow you to place the handle exactly where you need it. The LaSalle Bristol Cable-Actuated RV…

view full answer...

Answer 6

Unfortunately LaSalle Bristol completely covers the connection point in plastic so the only way to gain access to gate inside the LaSalle Bristol Cable-Actuated RV Waste Valve #34466N4BB96GM would be to cut into the plastic for the cord and…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Replacement Waste Cable for RV Black Water Tank

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching