Dust Caps with Rubber Plugs for 1.99" Hub and 2.72" Hub
Updated 05/12/2020 | Published 05/08/2020
Products Featured in This Question
Question:
Can someone contact me as I need dust covers for trailers. I am looking for dust covers that are off of 10 inch drum and 12 inch drums off RV trailers. Also need the rubber s. 1.98 is diameter for 10 inch and 2.72 is diameter of dust covers for 12 inch
asked by: Kevin
0
Expert Reply:
For the 10" use the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 part # RG04-040 for the 12" use the Dust Cap for Kodiak Disc Brake Kit 2.72 O.D. part # K7CAP.
Both of these will included the black rubber plugs as well.
expert reply by:
Randy B
0
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Continue Researching
- Q&A: What do All the Numbers on My Grease Seal Mean? What Numbers are Important?
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Availability of Dexter Bearing Kit for 3,500 lb Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Article: Most Popular Wheel Bearings
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Q&A: How Are The Dexter Vault Bearing Protectors Measured?
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Is It Illegal to Leave My Hitch on My Truck?