Rhino Rack Ladder Rack that Fits Retrax Pro XR Tonneau Cover

Question

Question:

I have a retrax pro XR and looking for a ladder rack . I’m aware of the yackima rack , and was led to believe that Thule and rhino racks were compatible. I can’t find either Thule or rhino, can you enlighten me on those models?

asked by: Dante Q

0

Expert Reply:

Rhino Rack and Thule have roof racks with lower bars that can fit the XR tracks but only Yakima has an actual ladder rack with the Yakima OverHaul HD Adjustable Truck Rack w/ Retrax XR Tonneau Cover Adapter # Y01151-5855 for your application which is a rack system that gives you 68 inch long HD style Yakima bars and everything needed to fit into the channels of the RetraxPRO XR.

expert reply by: Jameson C

0

Answer 1

I have a great ladder rack solution for you. When considering ladder rack compatibility, there is one key aspect to consider: whether the ladder rack mounts onto the truck's bed rails. The reason why this is a deciding factor is because bed rails…

view full answer...

Answer 2

Typically this is not the case, the exception being if the tonneau cover on your 2018 Ford F-150 Super Cab does not cover the stake pockets. It this is the case, we may have some options for you. If you want a ladder rack to extend over the cab of…

view full answer...

Answer 3

The TracRac SR part #TH43002XT-000EX that you referenced installs on the tops of the bed rails of a truck so you would need a tonneau cover that will install between the bedrails. For your 2015 Chevy Silverado 2500 with an 8 foot bed the RollBAK G2…

view full answer...

Answer 4

Hi Robert; the Thule TracRac SR #TH43002XT-000 or #TH43002XT-000EX is definitely the way to go if you're looking for a heavy duty ladder rack. This rack has a carrying capacity of 1,250 lbs which is higher than all the others. It also mounts to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Rhino Rack Ladder Rack that Fits Retrax Pro XR Tonneau Cover

Products Featured in This Question

Continue Researching