What is Width and Height of Thule Wingbar Crossbars

Question

Question:

Thank you! Looks like I should be going with this setup from your site: https://www.etrailer.com/multi-product.aspx?pc1=TH712300&pc2=TH710401&VehicleID=2017107622&HHYear=2017&HHMake=Audi&HHModel=A4+Allroad

asked by: Josh K

0

Expert Reply:

The dimensions of the Wingbar Thule crossbars like part # TH711420 are 3-1/8" wide x 1" tall.

expert reply by: Jameson C

0

Josh K.

5/7/2020

Thank you! Looks like I should be going with this setup from your site: https://www.etrailer.com/multi-product.aspx?pc1=TH712300&pc2=TH710401&VehicleID=2017107622&HHYear=2017&HHMake=Audi&HHModel=A4+Allroad

Jameson C.

5/7/2020

Yep! The Thule Wingbar roof rack part numbers # TH712300 and # TH710401 is the correct kit for your 2017 Audi A4 Allroad.

Answer 1

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey John, we'd be glad to help you pick out the best lift assisted kayak carrier for your 2026 Subaru Outback Wagon! I think the Thule Hullavator part #TH898 would be your best option as it is a little easier to use and load so that's what I…

view full answer...

Answer 6

It looks like you need the Replacement FootBase #753-2149 for the Thule Tracker roof rack. The hardware you need includes the following: Track Nut #853-2106 M6 x 17 mm Bolt #924-0617-15 M6 Washer #951061254 You'll want to reuse your Spacer…

view full answer...

Answer 7

The correct T-Channel nuts you need for the HD crossbars on your Pioneer platform rack can be found here: Replacement M8 Channel Nut for Rhino-Rack Accessories - #RR59TB The Rhino-Rack HD crossbars are definitely a different breed of crossbar which…

view full answer...

Answer 8

Hello Justin, The channel nut is 35mm long x 19mm wide x 8mm tall in the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars #RR43105.

view full answer...

Answer 9

I contacted Malone and the Malone XtraLight Trailer (MPG525) is not compatible with Crossbars for Malone MicroSport Trailers - 78" Long part #MPG4001. The only trailer that can use the longer cross bars is the Malone Microsport trailers that…

view full answer...

Answer 10

I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…

view full answer...

Answer 11

The difference between the end caps is simply that the Thule Load Bar Replacement End Caps THEC1 are the older version of replacement end caps, while the Replacement Endcaps for Thule SquareBar Roof Racks #TH1500052968 are direct replacement caps for…

view full answer...

Answer 12

We have replacement Thule square bar end caps with the part #THEC1.

view full answer...

What is Width and Height of Thule Wingbar Crossbars

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching