Replacement Gray Water Tank Valve for 1999 Winnebago Minnie Winnie

Question

Question:

I have a 1999 Winnebago Minnie Winnie with a Ford E-350. I need a new grey water tank valve. What one do I need?

asked by: Rebecca S

0

Expert Reply:

Since all gray water tank valves are pretty standard in size, you can use the Valterra Bladex Waste Valve Body for RV Gray Water Tank - Plastic Handle - 1-1/2" Diameter, part # T1001VP.

To install, remove the broken waste valve and seals from your gray-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.

expert reply by: Carla M

0

Answer 1

It sounds like you're looking for just the handle and cable for the waste valve system on your 2021 Winnebago Micro Minnie Travel Trailer and for that we have options from Valterra with different cable lengths: 72" - #TC72PB 96" -…

view full answer...

Answer 2

No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part #34466N4BB96GM, needs ABS solvent cement, part #3447530889, to secure the valve to your sewer…

view full answer...

Answer 3

RV sewer valves like the Bristol #34466NDHR19AAA that you referenced are the same valves used by many of the OEM's including, sometimes, Winnebago. We do not have the ability pull build sheets and know exactly what part was installed on your…

view full answer...

Answer 4

You can definitely cut and reattach the handle on the LaSalle Bristol Cable-Actuated RV Waste Valve #34466N11AB96GMA, but since this has a 96" cable and you just need 24" I recommend going with part #34466N11AB36GM instead which is the…

view full answer...

Answer 5

The LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank #34466N11AB36GM is the best replacement for your 310115. This also fits a 1-1/2" pipe and has the same 36" cable length.

view full answer...

Answer 6

I don't know the length of the cable used for valves on your Montana so you'll want to measure the length to determine the correct replacement. To make the swap out easy I recommend just unbolting the old valve from the system and then swap…

view full answer...

Answer 7

Unfortunately we don't have specifications like how far the pipe is from the edge of your travel trailer. But the LaSalle Bristol Cable-Actuated RV Waste Valve #34466N11AB36GM is designed to replace the waste valve from your travel trailers…

view full answer...

Answer 8

Take a look at the picture I have included. You can see that the cable is secured to the valve using a set screw. So you would loosen that, pull out the old cable, put in the new one, and tighten the set screw back down. If your valve is set up the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Gray Water Tank Valve for 1999 Winnebago Minnie Winnie

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching