Could Trailer Valet Trailer Jack TV34FR Be Easily Removed from Trailer Before Launching Boat

Question

Question:

Could I detach the jack when launching in saltwater? From the video it looks like the bracket-to-jack connection is similar in style to the weld-on pipe mounts, where you could just pull the pin and remove the jack. Is that the case?

asked by: Warren

0

Expert Reply:

Yes, if you wanted to preserve the life of the Trailer Valet JXS Trailer Jack w/ Footplate # TV34FR you could easily pull the pin out of the jack like you mentioned and pull the jack off of the trailer.

expert reply by: Jameson C

0

Answer 1

Hey Carl, yes you can install the Trailer Valet JXS #TV34FR on a trailer with a C-channel frame like what you sent in a picture of and it would work great. Is that an equipment trailer?

view full answer...

Answer 2

Hello David, Those are very valid concerns, especially in the world we live in today. I have 2 different locks for you to keep those "sticky bandits" away: 1st lock is the InfiniteRule Lock for Demco eZ-Latch Trailer Couplers - 2" and…

view full answer...

Answer 3

The Trailer Valet JXS Trailer Jack #TV34FR will come already lubricated. It is recommend to grease the internal gear system every 90 days.

view full answer...

Answer 4

The Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K #TV34FR has a 2,000 pound capacity. I think the confusion is coming from the tongue weight formula. The Trailer Valet JXS is designed to hold up the…

view full answer...

Answer 5

A side mounted jack that you could pivot up and out of the way for better ground clearance would work just fine. The A-frame location is convenient but in a situation like yours you certainly could go with the side mounted style. For that something…

view full answer...

Answer 6

The bracket system, out of the box, will accommodate trailer frame members up to 5 inches in height and 3-1/2 inches in thickness. For thicker frame members, you'd need to source some longer bolts. The jack has a 2000 lb lift capacity, but keep…

view full answer...

Answer 7

Yes, the Trailer Valet JXS Trailer Jack part #TV34FR will mount to a 2" wide x 3" tall trailer frame.

view full answer...

Answer 8

There is no wheel add-on specifically for the Trailer Valet JXS Trailer Jack part #TV34FR but there is a similar version of this jack with wheel, the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211 which is what I recommend using. This…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Could Trailer Valet Trailer Jack TV34FR Be Easily Removed from Trailer Before Launching Boat

Continue Researching