Replacement EZ Loadr Boat Trailer Bearings
Updated 04/17/2020 | Published 04/16/2020
Products Featured in This Question
Question:
What is the axle bearings that I need for a 1999 dual axle EZ Loader trailer Vin # 1ZEAAWNG6XA023178 with surge brakes. Thanks
asked by: Dan W
Expert Reply:
Based on your VIN I believe you have a 3,700 lb axle but unfortunately cannot confirm. If you have 10 inch hubs then that would help confirm. For that axle you would use # L44649 bearing and # L68149 bearing along with seal # 010-180-00.
The best way to confirm is actually to pull a hub and look at the numbers on the face of the bearings. Based on what I could find the above is the correct fit.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Q&A: What Bearing Kit and Replacement Parts for My Dexter Vault do I Need for 3,500 Axle Skeeter Boat?
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Article: Trailer Lighting Requirements
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)