Speed Rating for Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel

Question

Question:

What is the speed rating for this Kenda KR25 tire ?

asked by: John

0

Expert Reply:

The tire included with the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel # AM31208HWT is the Kenda Karrier S-Trail ST145/R12 # AM10130 which has a speed rating of 65 mph.

expert reply by: Jon G

0

Answer 1

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 2

I have a solution for you, but we do not have any 12 inch, 4 lug tire and wheel combos that will allow you to exceed the GVWR of your pop-up camper. The only 12 inch trailer tire we offer that will allow you to exceed your trailer's GVWR is the…

view full answer...

Answer 3

For a high-quality trailer tire that is size 4.80-12 and wheel with a 4 on 4" bolt pattern I strongly recommend the Kenda KR25 ST145R12 Radial Trailer Tire with 12" Aluminum Wheel #AM31208HWT. This wheel and tire combo is load range D with…

view full answer...

Answer 4

Thanks for the photo. We don't have a jack that has the integrated bracket like what your trailer has as that is more of a custom application. If you are able to remove the mount and re-weld it, then I recommend the Bulldog Round Jack - No Mount…

view full answer...

Answer 5

I spoke with my contact at Fulton and if your current jack pivots on a 1/2" bolt then you can use either part #FXP10 for a 1,200 lb option or part #FXP15 if you wanted a 1,500 lb option. These come with a bolt on bracket that can fit a 3" x…

view full answer...

Answer 6

What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton #FXP100W0301 and the #P9012-00…

view full answer...

Answer 7

You will have to check and ensure that you have enough clearance to fit the different wheels and tires on your 1988 Coleman Chesapeake. Your current 205/65-10" tires are 8.3" wide and 20.6" tall with a load rating of 1,100lbs per tire.…

view full answer...

Answer 8

Looks like you're running the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel #AM31208HWT - thanks for the photo! The tire is rated for 1,220 lbs at 65 psi so I can definitely see why you're experiencing bounce. You can…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Speed Rating for Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel

Featured Help Information

Miscellaneous Media

Continue Researching