How Long Of An Axle Do I Need For My Trailer
Updated 04/06/2020 | Published 04/04/2020
Products Featured in This Question
Question:
my frame is 80 inches wide how long i need the axle hub to hub
asked by: Grace
Expert Reply:
It sounds like you're trying to find a replacement axle for your trailer. In order to do that you'll want to also take into account the width of the tires/wheels you intend to use, along with the spindle length. With this in mind, you will want to start with the overall width of your trailer (80") and add the width of its fenders/wheel wells. From there, subtract the widths of your two chosen wheels and the lengths of the two spindles to determine the axle tube length.
If you are just looking to replace an existing axle on your trailer, you will want to measure the existing unit from the hub face (surface where wheel attaches) to the opposite hub face. Then to ensure a compatible replacement, you will also measure from the center of the leaf spring to the center of the other leaf spring. For example, the Dexter Trailer Axle # 35545I-EZ-89 has a hub face length of 89 inches and a spring center dimension of 74 inches.
I have attached a link that will take you to our available selection of trailer axles that you can look through.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: fender mounts
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Video: This Old Trailer: Replacing Leaf Springs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Article: Trailer Wiring Diagrams
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 12" Wheels - Qty 1
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Search Results: break away system
- Q&A: Picking Out Fenders for Trailer that Stick Out 7 inches from Frame
- Q&A: Do Suspension Hangers Need to Welded on Or Can They be Bolted On
- Q&A: How to Determine Correct Hub for Boat Trailer With 3,500 lb Axle
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: How to Identify Compatible Hubs for Vintage Utility Trailer
- Q&A: Should Trailer Axle have Bend In it that Faces Downward
- Shop: Brake Controller
- Q&A: Can 89" Inch Hub to Hub Axle Length be Used in Place of 88" Axle if Spring Seat Distance is the Same
- Search Results: axil
- Search Results: junction box
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Breaking Down the Dexter Trailer Axle w/ Electric Brakes
- Q&A: Trailer Axle Availability that is 85-1/2 Inches Long
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: Let’s Check Out the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Search Results: 3500 axle
- Video: Feature Review Hopkins Tow Doctor Vehicle End Test Unit
- Video: Checking Out the Hopkins Tow Doctor Trailer End Test Unit
- Video: Mount: Dexter Trailer Axle w/ Electric Brakes on a 1917 Ford Model T