Replacement Ventline Trailer Roof Vent With Screen VD0434

Question

Question:

I have a 2014 Sabre fifth wheel and need a replacement roof vent lid in smoked color. So id like to purchase the Replacement Dome assembly. Model is VD0434. What part number do I need so hinge matches up?

asked by: Mike W

0

Expert Reply:

From my research the VD0434 model number is the screen for a Ventline roof vent. We carry two replacement lids for the Ventline roof vents. It is more than likely you need the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent part # BVD0449-A03 which has a plastic hinge that I have added a photo of.

If your hinge is metal it is an older model, for that you will need Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03. I have added a photo of this as well.

expert reply by: Heather A

0

click to enlarge

Answer 1

The Command part number you've referenced refers to the board and switch replacement part of the LED RV Dome Light with Switch - 408 Lumens - Surface Mount - White Bezel - Warm White #328-K-1020WSM2, and these do have a 1 year warranty. If yours…

view full answer...

Answer 2

For a 1 inch lift we have found that in most cases there is no need for any spacer adapters for the Firestone Ride Rite kits like part #F2445. If a spacer was needed for such a small lift Firestone would have one available.

view full answer...

Answer 3

The standard vent size and cover size on most trailers is 14-1/4" x 14-1/4". To replace the vent cover you really need to know the hinge and lift arm style. Since trailer manufacturers like Forest River do not make details like which vents…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…

view full answer...

Answer 12

Thank you for all of the information! I definitely have some recommendations for you but I do encourage you to get that OEM suspension looked at especially if you think it used to look different prior to your last trip. Any suspension enhancement…

view full answer...

Replacement Ventline Trailer Roof Vent With Screen VD0434

Product Page this Question was Asked From

Continue Researching