Recommended Front Mount Hitch For 2020 Ram 1500 Lone Star

Question

Question:

I have a 2020 Ram 1500 Lone star and I want to add my winch mount to the front with a front mount hitch. Do you have a front mount hitch that will fit my truck?

asked by: Lew

0

Expert Reply:

Yes, the Curt Front Mount Trailer Hitch Receiver part # C87FR is a great option for a front mount hitch on the 2020 Ram 1500 Lone Star. It is rated for a line pull of 9,000 lbs (winch) and vertical load of 500 lbs (tongue weight). I have attached the installation instructions for your reference.

expert reply by: Heather A

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver #C87FR will not interfere with the automatic air dam on your 2021 Ram 1500. See the attached photo which shows the hitch installed on a Ram 1500 like yours. The automatic air dam can be seen in the lower…

view full answer...

Answer 2

Hey Edward, so the only front hitch we have for your 2022 Ram 1500 is the Curt hitch part #C87FR but it does require removing the tow hooks permanently. Due to the front end design of your truck there isn't a way to attach a front hitch and allow…

view full answer...

Answer 3

I do have an option for you but the only snowplow mount options for a 2022 Ram 1500 are hitch mounted therefore you will need a front mount trailer hitch, the Curt Front Mount Trailer Hitch Receiver part #C87FR is what I recommend. If you have a two…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Dave, welcome back. At this time, we don't have a custom-fit front receiver hitch for the 2026 Toyota Sequoia, and none of the major manufacturers, including Curt, Draw-Tite, or EcoHitch, offer one for that vehicle. The only option would be a…

view full answer...

Answer 11

Hey Steve, yes the Hellwig sway bar part #HE56TR does fit your 2023 Ram 1500 Quad Cab 4WD. The only model it doesn't fit is the TRX models. Hows the handling of the truck currently?

view full answer...

Answer 12

Hey Brian, the correct Timbren kit for a 2023 Ram 1500 4x4 is the part #TDR1500DS.

view full answer...

Recommended Front Mount Hitch For 2020 Ram 1500 Lone Star

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching