Which Timbren Suspension Enhancement Product for 2019 Chevy Silverado 2500

Question

Question:

What are the differences in Timbren Suspension system for a 2019 Chevy Silverado 2500, for the back axle? It looks like there's a TGMRTT35D and a TGMRTT35D model, I don't know which one to choose.

asked by: Ivan T

0

Expert Reply:

I'd be happy to help you with that. The Timbren # TGMRTT35D kit has an 8000 lb capacity, and is designed for super heavy duty applications like ambulances or tow trucks. For a regular pickup up truck, you'd want to go with the # TGMRTT35D.

expert reply by: Mike L

0

Answer 1

As the ball on the B&W Tow & Stow #BWTS20037B can be turned parallel to the ground, you should not have an issue using the 5 inch drop. That being said, if you do need more drop, the 7 inch drop #BWTS20040B will be the better option.

view full answer...

Answer 2

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

view full answer...

Answer 3

Once installed, the double convoluted springs from the Timbren SES Kit, #TGMRCK25D, will sit 5-3/16 inches below the jounce bumper holder on the frame. The outer diameter of these springs is 4-5/16 inches. The single convoluted springs from the…

view full answer...

Answer 4

Choosing the best suspension enhancement system will depend on how often you have your Lance 865 on your 2013 Silverado 2500HD. If you will be keeping the camper on your vehicle full time, or close to full time, the Timbren Rear Suspension…

view full answer...

Answer 5

The Timbren Rear Suspension Enhancement System #TGMRCK25D is 5-1/4" tall x 4-1/4" wide. The height is 6-1/4" with the included spacer. This is confirmed to fit your 2024 Sierra 3500.

view full answer...

Answer 6

If you are over the towing capacity for your truck I can't recommend anything that will make it safe to exceed that figure but we do have suspension enhancement kits for your truck which are designed for providing additional suspension support to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

The Timbren Rear Suspension Enhancement System part #TGMRCK25D which is a fit for a 2018 GMC Sierra 2500 will measure 5-1/4" tall without the 1" spacer or 6-1/4" tall with the 1" spacer. I have attached a photo below. The springs…

view full answer...

Answer 9

I recommend the Timbren Rear Suspension Enhancement System part #TGMRCK25D which is designed for pick up trucks like the 2019 Chevy Silverado 2500 and has a 8,600 lb capacity. The Timbren Rear Suspension Enhancement System part #TGMRTT35D is designed…

view full answer...

Answer 10

That's a big camper so I would recommend a higher BTU rated unit like the #ACCOL150 which is going to wire right up to the pre-wiring of your 2019 Grand Design Reflection 295 since it was wire for a Coleman. This Advent Air unit comes with wiring…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Which Timbren Suspension Enhancement Product for 2019 Chevy Silverado 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching