Slipper Leaf Springs, Equalizer and Wet Bolts for 2009 PJ Dump Trailer 7 x 14 14K  

Hey Dallas, If you'd like, you can use the Dexter Bronze Bushings #K71-291-00 with the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles #RM-2460-2580. That said, it really isn't needed because…

The Bronze Bushings part #K71-291-00 that you referenced does fit the standard leaf spring dimensions like what a Dexter 8k leaf spring would have.

There are bronze bushings you can use to replace the bushings on you double eye springs. What you can use is the Bronze Bushing #D014-077-00 which is a quantity of one or the Bronze Bushings #K71-291-00 if you wanted a quantity of four. These…

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long #SP-210275 you were looking at do have well made eye holes and are compatible with bronze bushings and wet bolts. You will need bronze bushings with an 11/16" O.D. like the…

Hey Charles, Yes, you can replace nylon bushing with bronze bushings/wets bolts, you'll just want to make sure the useable length matches for both the bolt and bushing. The Step Wet Bolt for 1-3/4" Double Eye Springs #34007-187-00 you were…

Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…

Hey Viencent, thanks for the information! To replace the bushings in your slipper springs, I recommend the Dexter Bronze Bushings item #K71-291-00. These have a 11/16" outer diameter and will replace all four of the bushings on your car hauler.…

Hey Donald. The Dexter 072-032-00 is a 26-1/2" long slipper spring, with a hook end, 5-leafs, that works with a 7,000 lbs axle. Our closest option to replacing this spring is the 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2"…

Hey Will, thanks for reaching out. What I recommend for replacing your 7-way is the following: - etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector #e99011 Wiring your connections thru the junction box helps keep them…