Can the Screen for the Replacement Door for Atwood RV Water Heaters Be Replaced Separately

Question

Question:

Can you purchase just the screen for the door?

asked by: Terence L

0

Expert Reply:

The screen door on the Replacement Door for Atwood RV Water Heaters part # AT91386 is not a replaceable part therefore if this is what you need then your only option would be to replace the entire assembly. I know this is not what you were hoping to hear but it is just simply not offered from the manufacturer so there is no way for us to offer this either. Please note, the Replacement Door for Atwood RV Water Heaters is also offered in black as part # AT91507.

expert reply by: Conner L

0

Answer 1

The #AT91507 Atwood Replacement Water Heater Door measures 14-5/8 x 18 inches as shown in the provided photo. I've linked you to a product description video featuring the water heater door.

view full answer...

Answer 2

Yes, the Replacement Door for Atwood RV Water Heaters #AT91386 installs using two pins at the bottom. It is then secured shut using a Water Heater Door Latch #372225. I have included a picture showing the door attached to the pins.

view full answer...

Answer 3

We have checked with Atwood and can confirm for you that the Replacement Black Door #AT91507 or white #AT91386 are a confirmed fit for your 6 gallon Atwood GC6AA-10E water heater.

view full answer...

Answer 4

Yes, the Replacement Door for Atwood RV Water Heaters #AT91386 will fit and replace your Atwood GH6-6E door. It is also available in black #AT91507.

view full answer...

Answer 5

No, the grill/screen is not sold separately for the Atwood 6-gallon water heater door, so you would need to get the entire door if your screen is missing or broken. The correct part is one of the following, depending on if you want a White or Black…

view full answer...

Answer 6

Hey, Greg. Thanks for your question. It sounds like you may be looking at the water heater door latch #372225. These aren't part of the hinge for the door but keep it closed. Below is a picture of how its used and I've also included a link…

view full answer...

Answer 7

Hey Dennis! Do you have a 6-gallon Atwood water heater? We have no way of knowing what is on your trailer so I can't say for sure if the #AT91507 will fit. It is designed for Atwood water heaters and measures 14-5/8" x 18" as seen in…

view full answer...

Answer 8

The Replacement Door for Atwood RV Water Heaters part #AT91386 is correct for all Atwood 6 gallon water heaters which includes the GC6AA-9E so yes, it will work.

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Can the Screen for the Replacement Door for Atwood RV Water Heaters Be Replaced Separately

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching