Atwood Water Heater Replacement Door for Water Heater # GC6AA-10E

Question

Question:

I am looking for an access door for my Atwood water heater. The serial # begins with 96160 and the model number is GC6AA-10E. Can you tell me if # AT91386 would be the right door? I believe it measures the same as you said but need to verify this will fit for sure.

asked by: Linda B

0

Expert Reply:

We have checked with Atwood and can confirm for you that the Replacement Black Door # AT91507 or white # AT91386 are a confirmed fit for your 6 gallon Atwood GC6AA-10E water heater.

expert reply by: Jameson C

0

Answer 1

I wasn't able to find the picture you were referring too, however in the instructions for the GC6AA-10E and was able to locate the heating element; It is shown as item 17 in the image below.

view full answer...

Answer 2

Yes, the Replacement Door for Atwood RV Water Heaters #AT91386 installs using two pins at the bottom. It is then secured shut using a Water Heater Door Latch #372225. I have included a picture showing the door attached to the pins.

view full answer...

Answer 3

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 4

Hey Dennis! Do you have a 6-gallon Atwood water heater? We have no way of knowing what is on your trailer so I can't say for sure if the #AT91507 will fit. It is designed for Atwood water heaters and measures 14-5/8" x 18" as seen in…

view full answer...

Answer 5

On your model Atwood Water Heater GC6AA-10E the electric heating element is located in the water tank in the back side of the water heater. Atwood does recommend having a RV repair shop replace the heating element because of it's location.

view full answer...

Answer 6

The Replacement Black Door for 6-Gallon Atwood Water Heater part #AT91507 does not come with any pins/hardware to attach it to the water heater. It is designed to reuse the pins/hardware that hold the existing door on. If you need these then your…

view full answer...

Answer 7

For your Magic Chef Microwave MCD991ARB I recommend replacing it with the: -Greystone Standard RV Microwave #GR67FR. This microwave is slightly larger at 19" compared to your 18.3", but is comparable in height at 13-1/2" to your…

view full answer...

Answer 8

Hello Brian, thanks for reaching out. Our records show the Lippert V000448334 is a standard 7,000 lb axle that uses the #25580 (1.75" ID) inner bearing and 02475 (1.25" ID) outer bearing. I do suggest you remove a hub and confirm this is…

view full answer...

Answer 9

To replace your Atwood GC6AA-10E water heater I recommend the Furrion RV Tankless Water Heater #FR48SR. This unit is tankless and widely surpasses the performance of the other water heaters we currently carry. This unit is powered by gas but does…

view full answer...

Answer 10

The Replacement Black Door for 6-Gallon Atwood Water Heater #AT91507 will fit 6 gallon and some 10 gallon Atwood models. If you have one of these on your 2019 Fleetwood Bounder 35K then this is the correct replacement door. I recommend measuring to…

view full answer...

Answer 11

There sure is! We have the Furrion RV Tankless Water Heater #FR98SR which fits has an overall size of 19-3/16" deep x 12-5/8" tall x 12-13/16" wide and an access door size of 16-1/8" tall x 16-1/8" wide so it will be a…

view full answer...

Atwood Water Heater Replacement Door for Water Heater # GC6AA-10E

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching