Draw Tite or Curt Front Hitch for 2020 Ford F-350 Super Duty

Question

Question:

Which hitch should I get for my 2020 Ford F-350 Super Duty?

asked by: Larry

0

Expert Reply:

I like the Draw Tite part # 65076 for your 2020 Ford F-350 Super Duty as it has the best ground clearance. The Curt part # C31078 sits a bit lower which I don't think you'll want.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.

view full answer...

Answer 2

If you are carrying more than 500 lbs on the front of your F-350 then the only front mount hitch that will work is the EcoHitch item #306-X7904. This hitch has a 1,000 lbs vertical load limit (tongue weight). The Curt item #C31078 only has a 500 lbs…

view full answer...

Answer 3

Of the two hitches that fit your 2020 Ford F-250 the Curt hitch part #C31078 sticks out less than the Draw Tite part #65078. I attached two pictures to show you the difference. The Curt is the first picture and the Draw Tite is the second.

view full answer...

Answer 4

I have a solution for you, but the Curt #C31008 is only designed to fit on 2008-2010 Ford Super Duty trucks. For a 2019 Ford F-350 you'll need the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31078, which is the confirmed…

view full answer...

Answer 5

When it comes to the Curt Trailer Hitch Receiver #C23FR compared to the Draw-Tite Trailer Hitch Receiver #DR47FR for your 2020 Ford Escape there are a couple of differences between the two that I'll go over for you. The first is the style, with…

view full answer...

Answer 6

There are too many variables concerning the design and construction of the travel trailer to determine. I can imagine that the wheel wells and consequently the inside cabinets would have to be moved among other things. From your scale receipt it…

view full answer...

Answer 7

You are exactly right when you mentioned the tongue weight of a trailer being accounted for when determining its overall capacity. It is not uncommon for trailer manufacturers to list a trailer's GVWR to be a bit higher than the combined capacity…

view full answer...

Answer 8

I do have a potential option for you, however the Draw-Tite Front Mount Trailer Hitch #65076 is not confirmed to fit the 2023 Ford F-550. Since there is no custom fit option, your best option is going to be with a universal model like the Draw-Tite…

view full answer...

Answer 9

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit on your 2020 Ford F-450 Super Duty. I have linked a video below that will show you the installation process on your F-450. In the video the installer refers to it as an intercooler but…

view full answer...

Answer 10

For your 2015 Ford F-350 the correct front hitch is the part #65049 which is a confirmed fit. The part #65076 is for newer versions of your truck so it would not be fit. I attached an install video and an install pic as well.

view full answer...

Answer 11

The crosstube on the Draw-Tite #65076 and Curt #C31078 front hitch receivers for your 2018 Ford F-250 Super Duty are at different locations than the mounting brackets connected to them. To really determine where the hitch pin hole will be we need to…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Draw Tite or Curt Front Hitch for 2020 Ford F-350 Super Duty

Products Featured in This Question

Continue Researching