What is Amp and Wattage Draw of Everchill Refrigerator for RVs # 324-000119

Question

Question:

How many watts per hour does the 12 volt Everchill ?

asked by: Joseph M

0

Expert Reply:

The current draw of the Everchill Refrigerator for RVs # 324-000119 is 11 amps or 132 watts at 12 volts. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

We have confirmed with Everchill that the Everchill RV Refrigerator with Freezer #324-000119 does indeed draw 8-9 amps when starting up, and then 3 amps in order to maintain its set temperature. I have added a link to a video review for you to check…

view full answer...

Answer 2

I spoke to my contact at Way Interglobal about the Everchill Refrigerator part #324-000119. They informed me that upon startup and until the set temperature is reached, the unit will draw 8-9 amps. Once the set temperature is reached, it will draw…

view full answer...

Answer 3

We do; the correct replacement for the 1510000236 is the Replacement Auto-Programmable Controller Panel #LC26TF.

view full answer...

Answer 4

The EverChill RV Refrigerator #WAY44FR is a 12 volt fridge which means that it is a compressor fridge.

view full answer...

Answer 5

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 6

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 7

If you were willing to mount the mount bracket of the Brophy Scissor Step kit part #AS23 to your truck's tailgate yes this will fit and work well for you.

view full answer...

Answer 8

The Brophy Tailgate Scissor Step Mounting Bracket, #TSSB is not confirmed to fit with the TorkLift GlowStep Camper Scissor Steps, #TLA7503-8000. The #TSSB is however designed to work with Brophy manufactured steps of similar dimensions to the…

view full answer...

Answer 9

Yes, you can mount the Brophy Steel Scissor Steps, #SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long…

view full answer...

Answer 10

You do not have to remove the tailgate on your 1997 Ford F-150 to use the Brophy Hitch Stair, #RHS2. If you keep the tailgate down you will not be able to use the top step because it will be covered by the tailgate, but you can still use the lower…

view full answer...

Answer 11

Based on the picture you provided I believe you have the SAE solar plug port on your Braxton Creek Bushwhacker Plus 17BH so you should have no issues plugging your Go Power DuraLite Portable Solar Panel with Digital Solar Controller #GP66FR in using…

view full answer...

Answer 12

The benefits of an Equal-I-zer hitch over the e2 is primarily the improved 4-point sway control of the Equal-I-zer. The 4-point sway control utilizes steel on steel friction at the arms as well as in the hitch head to stop sway. The e2's 2-point…

view full answer...

What is Amp and Wattage Draw of Everchill Refrigerator for RVs # 324-000119

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching