Could Yakima Locking Hitch Pin and Bolt be Used as Universal Hitch Lock

Question

Question:

Is there an SKS lock end for this pin? Any reason part # 8890260 wouldnt work as an anti-rattle pin for a non-Yakima rack w/ a hollow steel 2inch shank?

asked by: Kevin

0

Expert Reply:

There is an SKS lock end that works with the # 8890260 with the part # Y07235 but by the time you add up the cost of both parts you are better off going with a similar universal setup like the # 63232 since the price is better and would work just as well if not better!

I attached a review video for the # 63232 for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Hey Ezra, for the Yakima Long Haul Bike Rack part #Y02476 the correct replacement hitch pin bolt would be the part #Y8890200. Did you lose yours?

view full answer...

Answer 2

Hello Dave, thanks for reaching out. Yes, we do have the bolt used to connect the 2-bike add-on to the Yakima HoldUp #Y02446 rack. For that you'll need the following: - Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks…

view full answer...

Answer 3

Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly #8880580. Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt #8890200 to secure the…

view full answer...

Answer 4

The model number for a Yakima HoldUp bike rack like item #Y02443 will be on the rear side of the front cradle facing away from the vehicle as shown in the picture below. If you have a black Yakima HoldUp bike rack or the 2-bike add on item #Y02446…

view full answer...

Answer 5

The Replacement Aluminum Hitch Adapter Sleeve for Saris 1-1/4" Hitch Bike Racks #SA3032 is not the best option for you. There is not a shank adjustment sleeve like that for your Yakima Holdup. You would either want the 2 inch shank #8880580 or…

view full answer...

Answer 6

I have a solution for adding turn signals to your Yakima Holdup part #Y02443 but it will require you to drill the cross tube of the rack which Yakima is not going to care for. What you need is the light kit part #98174LED which will plug into a 4-way…

view full answer...

Answer 7

I definitely have some options so that you can use your Yakima Hold-Up EVO Bike rack #Y02480, but the reason Yakima does not recommend using an adapter with this bike rack is because most hitch adapters reduce the weight capacity of your hitch by…

view full answer...

Could Yakima Locking Hitch Pin and Bolt be Used as Universal Hitch Lock

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching