Can Extra Key Fob be Ordered with Autowbrake Electric Brake Controller # 3430001

Question

Question:

I need more then 1 key fob if I buy this unit, can I order additional fobs? If I have 2 trailers, with a separate unit on each trailer will the same fob work on both trailers depending on which trailer I have hooked up to my vehicle?

asked by: Gary

0

Expert Reply:

You can order additional key fobs with the Autobrake # 3430001 that you referenced with part # FOB1. There isn't a pairing process as they are all programmed to use the same frequency.

expert reply by: Jameson C

0

Answer 1

The Autowbrake #3430001 installs on the trailer side so you would generally just utilize the 7 way plug already on the trailer. We do recommend using a junction box to connect the Autowbrake wiring harness. We actually make an installation kit…

view full answer...

Answer 2

We actually have a great article on exactly this subject that I have attached below. It will walk you through all the items you need to add electric brakes to a trailer like your Scamp 13 footer. This will also give you a good idea as to if it's…

view full answer...

Answer 3

The Autowbrake Electric Brake Controller - Trailer Mount - 1 to 3 Axles - Proportional #3430001 key fob has a range up to 300 feet away per the manufacturer. So it should work just fine with your 34 foot RV. It sounds like your key fab could be…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Can Extra Key Fob be Ordered with Autowbrake Electric Brake Controller # 3430001

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching