Recommended 2 Inch Trailer Hitch for 2018 GMC Terrain without Drilling

Question

Question:

Hi. I'm looking for a 2" trailer hitch for my 2020 GMC Terrain. Do not want to drill. Is there a bolt on option available yet for this vehicle? Thank you for your help.

asked by: Tom

0

Expert Reply:

Yes, for your 2020 GMC Terrain I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76419. This custom 2" hitch will line up to existing holes on your Terrain's frame rails for a simple bolt-on, no-drill installation. It also features a sleek hidden crosstube design that allows only the 2" receiver to be seen from the rear, providing you with a clean factory-like appearance. I have attached a couple images below so you can see exactly what I mean.

This Class III hitch has a 4,500 pound towing weight capacity and a 450 pound tongue weight limit. I have included a full installation video that you can use for reference as well.

expert reply by: Chris R

0

click to enlarge

Answer 1

There is a trailer hitch available for your 2018 Chevy Equinox but the Draw-Tite #76217 will NOT fit unless you have a diesel engine. For your '18 Equinox I recommend checking out the Draw-Tite #76419 which fits directly below your bumper; you…

view full answer...

Answer 2

The 2 inch hitches we offer for your 2018 GMC Terrain don't require any drilling to install. The Draw Tite part #76419 is a great fit for your vehicle if you have the gas engine. If instead you have a diesel engine you'd want the part #76217.…

view full answer...

Answer 3

We had one customer come back and tell us that the safety chain loops of the Draw Tite hitch part #76217 occasionally do drag the ground. I wouldn't say it's a huge problem though as we've sold quite a few of these hitches and only had…

view full answer...

Answer 4

Like all the hitches we offer for the 2020 Chevy Equinox, the receiver tube of the Draw-Tite #76419 will be located underneath the bumper fascia, not protruding through it like the factory hitch does. This is because factory hitch equipped vehicles…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended 2 Inch Trailer Hitch for 2018 GMC Terrain without Drilling

Featured Help Information

Miscellaneous Media

Continue Researching