Dimensions for Dutton-Lainson Covered Hand Trailer Winch DL17085

Question

Question:

What are the dimensions of the DL17085?

asked by: Scott W

0

Expert Reply:

When looking at it from the front the winch will have an overall width of approximately 6-3/4", which does not include the extension from the handle. It has a height of right at 8" without the handle and from front to back it measures 13-1/2".

I have attached a video review of this winch that shows all of its measurements, including the measurements including the handle.

expert reply by: Chris R

0

Answer 1

Fulton winches like the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap part #F142418 are made in Mexico according to Fulton. If you are looking for a winch made in the USA you may consider the Dutton-Lainson Covered Hand Winch part…

view full answer...

Answer 2

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 3

The Dutton-Lainson Covered Hand Winch #DL17085 is 13-1/2" long/wide when looking at the side. I added a review video of this winch that shows more of its measurements for your to check out.

view full answer...

Answer 4

For your application I recommend going with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 rated for 1,500 lbs. This is powered by 12V DC power which is what your Li-ion battery will supply. I really like the remote that comes with this…

view full answer...

Answer 5

The Replacement Spring #4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.

view full answer...

Answer 6

I wouldn't recommend using a jumper box for long term use as you may over heat it but there are quite a few people who have used them with winches like the Dutton Lainson StrongArm #TW4015 and it worked well.

view full answer...

Answer 7

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

I really like the Dutton-Lainson Covered Hand Winch #DL17048 for your 2003 Ranger 205 boat because it's covered to it looks more sleek, and it has a 1,900 lb weight rating which means it can easily handle the weight of your trailer even if you…

view full answer...

Dimensions for Dutton-Lainson Covered Hand Trailer Winch DL17085

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching