Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The 8.75-16.5 tire size has an overall diameter of 29.5 inches and the tire size 235/80-16 like part #TTWTRTM2358016E has a diameter of 30.8 inches.
view full answer...To see where the brake controller port is on your 2011 Ford E-450 motorhome check out the picture I attached. The plug will be behind the door that is pointed out using the screwdriver in the picture. The #3034-P harness you referenced is the correct…
view full answer...I checked with Pro Series and for installing the Pro Series Jack part #PS1401000303 they recommend 15-20 ft lbs of torque for the hardware that holds the jack to the trailer. I attached a picture that has the complete install instructions for you to…
view full answer...The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…
view full answer...As far as the cables/plugs that come with breakaway systems, they are virtually universal for trailers. As far as a great breakaway system for your 2020 Hay Flight 29RKS, the breakaway options depend on where you want to mount the switch. For the…
view full answer...The best way to add a 7-way trailer connector onto the back of your 2017 Lexus RX 450h that already had a 4-way connector is with #ETBC7. This gives you all the components needed for a fully functioning 7-way and comes with the instructions, which…
view full answer...The Tekonsha Prodigy RF Wireless Trailer Brake Controller part #TK94FR will use the stop/turn signal circuit for an trigger/activation and then the battery charge line circuit for power. Therefore, if you have a 4-way trailer connector and need to…
view full answer...The spare tire can be mounted near the wheel and axle to the frame, but you will want more than 5 inches of ground clearance. I recommend the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22145 based on your photo. Every extra inch…
view full answer...Both the Autowbrake Electric Brake Controller #3430001 and Tekonsha Prodigy RF Wireless Trailer Brake Controller #TK94FR are great options to add a brake controller to the trailer. This is ideal if you have one trailer that you need to use the brake…
view full answer...The Tekonsha Prodigy RF Wireless Trailer Brake Controller - 1 to 3 Axles - Proportional #TK94FR will still allow your trailer battery to receive a maintenance charge while connected. It is true that the brake controller will draw power from the 12V…
view full answer...If the trailer became disconnected from the tow vehicle the Prodigy RF #TK94FR would not have that power interruption from the vehicle 12 volt circuit to tell it to apply the trailer brakes. The RF does actually need the brake signal to function…
view full answer...Your best option would be to install the 12 volt outlet kit part #RM-9332 on your vehicle so that you can have the correct outlet to power the remote of the Prodigy RF part #TK94FR that you referenced. This wires directly to the battery and gives you…
view full answer...Filter Your Search
Contact and Help