Electric Boat Winch Recommendation to Work with Lithium Ion Battery

Question

Question:

Who makes a Li-ion powered boat trailer winches

asked by: Jim M

0

Expert Reply:

For your application I recommend going with the Dutton-Lainson StrongArm Electric Trailer Winch # TW4015 rated for 1,500 lbs. This is powered by 12V DC power which is what your Li-ion battery will supply. I really like the remote that comes with this so you can step back and keep an eye on things when loading or unloading your boat.

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 2

The Dutton-Lainson Covered Hand Winch #DL17085 is 13-1/2" long/wide when looking at the side. I added a review video of this winch that shows more of its measurements for your to check out.

view full answer...

Answer 3

When looking at it from the front the winch will have an overall width of approximately 6-3/4", which does not include the extension from the handle. It has a height of right at 8" without the handle and from front to back it measures…

view full answer...

Answer 4

Fulton winches like the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap part #F142418 are made in Mexico according to Fulton. If you are looking for a winch made in the USA you may consider the Dutton-Lainson Covered Hand Winch part…

view full answer...

Answer 5

The Replacement Spring #4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.

view full answer...

Answer 6

The type of battery you are looking for to use with the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 is just going to be a 12 volt battery rated for a minimum of 40 amps, and this is going to be a standard vehicle battery. There are so…

view full answer...

Answer 7

I wouldn't recommend using a jumper box for long term use as you may over heat it but there are quite a few people who have used them with winches like the Dutton Lainson StrongArm #TW4015 and it worked well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Electric Boat Winch Recommendation to Work with Lithium Ion Battery

Featured Help Information

Miscellaneous Media

Continue Researching