Dimensions of Replacement Steering Pin for Roadmaster Tow Dolly

Question

Question:

Item # RM-357100-00 how long is it?

asked by: Terry

0

Expert Reply:

I went out and took some measurments for you and found that the Replacement Steering Pin and Clip for Roadmaster Tow Dollies # RM-357100-00 is approximately 5-1/2 inches long (4-1/2 inch usable length) by 5/8 inch diameter. I have included a few other helpful measurements as well in the attached photo.

This is designed to fit Roadmaster # RM-2000-1 and # 2050-1 tow dollies.

expert reply by: Carla M

0

click to enlarge

Answer 1

I went and pulled a Replacement Folding Pin and Clip #SP487 from our warehouse to measure it and found that it is 6 inches overall in length, 5-1/2 inches long if you don't include the 90 degree bent portion of the pin and 1/2 inch thick.

view full answer...

Answer 2

Hi John; do you mean a bolt that connects the head #C56WR to the legs #C99WR? Curt hitches continue to use the same hardware for the 5th wheel hitch heads so the Replacement Head Mounting Hardware for Curt 5th Wheel Slider Hitches #C35UR will also…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Dimensions of Replacement Steering Pin for Roadmaster Tow Dolly

Product Page this Question was Asked From

Continue Researching