Recommended Wiring to Flat Tow 2020 Jeep Wrangler Behind Motorhome

Published 11/08/2019

Products Featured in This Question

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3397)

$161.90

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3503)

$526.95

Roadmaster 80" Coiled Safety Cables - Double Hook - 10,000 lbs - Qty 2

(96)

$115.95

Question:

Setting up our 2020 Jeep Wrangler to flat tow and looking for the right wiring for lights. Can you recommend? Thank you.

asked by: Blake

Expert Reply:

To wire up your 2020 Jeep Wrangler so that it accepts the signal lights from your RV I highly recommend the Roadmaster Diode Flexo-Coil Wiring Kit # RM-15267. This will tap into the tail light circuits of the Jeep and provide you with a 6-Way to mount at the front, along with enough coiled wiring to go from there to the 7-Way on the motorhome. The included diodes prevent any potentially harmful feedback.

I have attached an installation video on an earlier model Wrangler that you can use for reference.

In order to flat tow the vehicle you will also need a base plate kit, tow bar, safety cables, and a supplemental braking system. You might already have these components but just in case I went ahead and listed my recommendations below:

Base Plate Kit - Roadmaster Direct-Connect # RM-521453-5
Tow Bar - Roadmaster BlackHawk 2 All Terrain # RM-422
Safety Cables - # RM-653
Supplemental Braking System - Brake Buddy Classic 3 # HM39494

I have attached a few video reviews on these products that you can check out as well.