EOH Trailer Brakes Do Not Activate With Time-Delay Controller When Brakes Applied in 2019 Ram 3500

Question

Question:

I have a 2019 Ram 3500 and my trailer was just outfitted with electric over hydraulic brakes. I have the factory 7-way and time-delay controller and now it seems like my trailer brakes are not coming on? What do I need to do?

asked by: Ronnie D

0

Expert Reply:

That's a good question, and the reason your electric over hydraulic brakes are not activating is because the time-delayed brake controller is not compatible with electric over hydraulic brakes, so what you'll need to do is get a brake controller that is compatible.

For that I strongly recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR, and since you have the factory 7-way you will only need the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers # 331-TPH-020 to install it.

The reason the Tow-Pro Elite is so great is because of its control knob which keeps a cumbersome unit out of the cab of your 2019 Ram 3500, and because it gives you more control over your trailer braking power than any other brake controller. The control knob of the Tow-Pro Elite can be installed anywhere you like in your truck, which saves you space and also means you won't be bumping your knee against a unit that has to mount under the dash, which is a bane to the majority of brake controller users.

Along with being able to mount the control knob wherever you like, the Tow-Pro Elite also has two braking modes, the standard proportional control, which powers your trailer brakes with the same intensity as your vehicle brakes, or user-controlled mode, which allows you to apply the brakes with a pre-set amount of power your choosing. This can be really helpful in a number of situations, and especially helpful when going off-road or even when going down a long descent, because you can set your trailer braking to a higher intensity, which keeps the trailer from pushing your truck.

I have added a link to a video review of the Tow-Pro Elite Trailer Brake Controller # 331-EBRH-ACCV2 and Wiring Harness # 331-TPH-020 for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Thanks for reaching out Larry, Yea I did a double take when i seen 5500 lol If your 2019 Ram 5500 has the factory trailer tow package, the #RED87CR is indeed the correct fit and the mating connector should be present somewhere behind the dash. The…

view full answer...

Answer 2

Thank you for your purchase from etrailer of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034. When it comes to the clunking you are hearing, the most likely issue is the capture plates needing to be adjusted, as these do need to be…

view full answer...

Answer 3

To me that looks like one of the urethane bumpers #DM15469, so you'll want to replace that first. This was most likely caused by wear and tear as the clunking I believe to be related to your capture plate needing to be adjusted. What you're…

view full answer...

Answer 4

Yes, your 2020 Ram 2500's factory brake controller will work with electric over hydraulic(EOH) brakes. Like the HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi #HBA16. You might also have a LITE EOH mode and a HEAVY EOH…

view full answer...

Answer 5

In regards to weak braking with an electric over hydraulic actuator using the factory trailer brake controller on a Ram 2500/3500, the issue is likely the brake controller. In fact, I ran into this same issue before during an install, the factory Ram…

view full answer...

Answer 6

It sounds like you need the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM for the OEM brake controller on your 2022 Ram 3500. This will ensure that your controller works properly with the Hydrastar Electric Over Hydraulic…

view full answer...

Answer 7

How old is the hitch? Does your fifth wheel have a standard pin box or a cushioned pin box? Has it been lubricated? Does the locking bar automatically lock when the jaw closes? The thing that comes to mind immediately is the capture plates may not be…

view full answer...

Answer 8

Assuming you have the factory brake controller on your 2020 Ram 3500 it is likely that you will need the #HBA-CAM for your HydraStar Electric Over Hydraulic Actuator #HBA16 to function properly. I reached out to Hydrastar and they are not 100% sure,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

For your 7K Lippert Axle I'd go with the etrailer #AKEBRK-7-SA you were looking at. They will be a direct replacement, and will include both sides for one axle, if you have two axles, you're going to need two of these. I really like the…

view full answer...

Answer 12

We have really great head units you can use to upgrade from your Furrion DV3300 but Furrion no longer uses the style of connector that the DV3300 came with so it wouldn't be a plug and play install. The part #DV1230BL is the upgraded successor to…

view full answer...

EOH Trailer Brakes Do Not Activate With Time-Delay Controller When Brakes Applied in 2019 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching