Will Dexter Electric Trailer Brakes Fit a Rockwell 3,500 Lb Axle

Question

Question:

will Dexter electric brakes fit on a Rockwell 3500# axle?

asked by: Bob N

0

Expert Reply:

Yes, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 for self-adjusting or the Dexter Electric Trailer Brake Kit part # 23-26-27 for manual adjusting will fit a Rockwell 3,500 Lb Axle. The Rockwell Axles have the same brake mounting flange dimensions as the Dexter Axles so the brakes are all cross-compatible.

The self-adjusting brakes simply mean you will not have to adjust the star wheel on the back of the backing plate every season for even brake pad wear and performance as it does this for you automatically.

expert reply by: Conner L

0

Answer 1

There would be a noticeable difference if you had both the Aero Pro light #STL37RB and the Glolight, #STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the…

view full answer...

Answer 2

The GloLight Thinline LED #MCL165AB is a multi-function light in the sense that it can be mounted in different spots to provide certain functions, not in the sense that it will function as a blinking and non-blinking light. It will not operate any…

view full answer...

Answer 3

According to Optronics the GloLight Thinline LED Trailer Clearance or Side Marker Light - Submersible - Rectangle - Amber Lens #MCL165AB has 10 diodes in the light. The quantity for this item is one, so you would receive one light if you ordered a…

view full answer...

Answer 4

On a 10 inch brake assembly such as #23-468 the magnet draws 3.2 to 4 amps at 12 to 13 volts. There are actually trailer brakes that have a parking brake feature such as #23-113 that you can use with kit #T2385200. With this set up you would be able…

view full answer...

Answer 5

I currently have four different self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes. You can choose from the following: -Terran Axle Electric Trailer Brakes #TX97ZJ (3,500 Axles) -etrailer Electric Trailer…

view full answer...

Answer 6

Hey Michael, thanks for reaching out! The Dexter Nev-R-Adjust Electric Trailer Brakes #23-468-469 are an excellent choice, and will pair nicely with the Dexter Trailer Hub & Drum Assembly #84546UC3-EZ. This hub and drum comes pre-greased to…

view full answer...

Answer 7

Hey Chris! We don't have a way of knowing which axle is on your 2017 Jayco Jay Flight 17BH but I can still help you out. If I had to guess based on the GVWR it is a 3,500 lb axle so the correct bearing kit would be the #BK2-100. If you can take a…

view full answer...

Answer 8

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

From your description the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469 is exactly what you need. They fit with 10" hubs, are rated for a 3,500 lb axle, and they mount on a 4 bolt brake mounting flange with 2-7/8" spacing on…

view full answer...

Will Dexter Electric Trailer Brakes Fit a Rockwell 3,500 Lb Axle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching