Replacement Studs for Trailer Hub that are 2 inch Long and .54 inch Spline Diameter
Updated 10/07/2019 | Published 10/06/2019
Question:
I am needing to replace the studs on my older trailer. The studs measure 1.975” long 2” B, diameter is 1/2” 20 A, Spline length is around .575 C, base length is .75 D, amd spline diameter now measures .54 after removal E. The hub is 6” diameter 5 hole with 5” stud spacing. The holes in the hub are .520 is the .020 interference correct and what stud will fit best. Thanks
asked by: Keith B
Expert Reply:
Based on the dimensions of your old studs the part # K12WB2 that you referenced is exactly what you'd need. The .02 inch diameter difference you mentioned for the splines ensures that the stud fits tightly.
I attached a review video for this stud for you to check out as well.
Product Page this Question was Asked From
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ad2527e grease seal
- Search Results: dexter spindle
- Search Results: grease seal
- Search Results: ufp master cylinder
- Search Results: surge brake actuator brake actuator
- Search Results: brake master cylinder
- Q&A: Replacement Bearings, Races and Grease Seal For a UFP HD-1377-10 Trailer Hub
- Q&A: 2800lbs Axle Replacement Seal
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Wheel Seal With 1.63 ID and 2.375 OD
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Replacement Master Cylinder Assembly for Dexter Brake Actuators - Drum Brakes
- Q&A: Replacement Wheel Studs For A 3,500lb Trailer Hub Assembly
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Grease Seal - Double Lip - I.D. 1.688" / O.D. 2.332" - Older UFP Hubs/Marine Axles - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Q&A: Flexible Hydraulic Brake Line Hose for Trailer Brakes
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Brake Controller
on Accessories and Parts
