Replacement Wheel Studs For A 3,500lb Trailer Hub Assembly
Updated 01/12/2026 | Published 08/30/2024
Products Featured in This Question
Question:
I have a 3,500 pound axel with 5 x 4.5 hubs. I am in need of the the lug bolts/studs. Do you sell them? Individual or in packaged set? Thank you, Mike
asked by: Mike N
Expert Reply:
Hey Mike,
We sell replacement studs in single or multiple quantities depending on the specific sizing. For a 3,500lb trailer hub you most likely need the # DE52GR but I recommend punching one of your current ones out and comparing. The # DE52GR is 2" in length with a 1/2"-20 thread size. If you find your hubs have a different size wheel stud just let me know and I'd be happy to look for the correct replacement.
Product Page this Question was Asked From
Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8K - E-Z Lube - Dexter
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 9/16 Inch Studs
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2-1/2" Long
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Search Results: bearing grease packer
- Search Results: grease packer
- Search Results: bearing grease
- Search Results: 1/2 lug nuts
- Shop: Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Video: Review of DeeMaxx 2 Inch Wheel Bolt For 13 Inch Integral Hub And Rotor Brake Assembly - DE52GR
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Search Results: rg03~120
- Q&A: Replacement Wheel Studs for 6k Rated Trailer Hub with 6 Lug Bolt Pattern
- Q&A: Recommended Quality Replacements for 1/2"-20 Lug Nuts on a 2018 Grand Design Reflection 290BH
- Q&A: Replacement 1/2-20x2.25 Wheel Studs
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Search Results: akebrk~35
- Q&A: Replacement 1/2" Thread Wheel Studs For A Trailer
- Search Results: grease seal 58846
- Q&A: Looking For Wheel Studs For Dexter 4,400 lb Axle
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Q&A: Replacement Wheel Stud for AxleTek Hub BD2-545-17
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: Trailer Hitch
- Video: Replacement Shock Absorber for Dexter Model 60 Brake Actuators Spec Review
- Video: Review of Titan Brake Actuator - T4820000
- Video: An In-Depth Look at the Replacement Master Cylinder Assembly for Dexter Brake Actuators
- Video: Let’s Check Out the Dexter Hydraulic Brake Line with Fittings
Robin H.
1/12/2026
Hey Mike, did the # DE52GR wheel studs match up with your 3,500‑lb hub once you compared them? Knowing what fit could help others trying to replace their studs too.