How to Determine Which Lasalle Bristol CrossBreeze Screen would fit a Toy Hauler

Question

Question:

Will this fit an eclipse attitude 2015 38crsg

asked by: Tim

0

Expert Reply:

If you can measure the width of your toy hauler's rear door opening I can determine which LaSalle Bristol CrossBreeze Screen you'd need. The part # 3441409775PBK is the correct screen if your opening is 97-3/4 inches wide. If you need a different width let me know or check out the link I attached that has all of them listed.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 2

If it is necessary to cut the rails, I suggest you place the top piece into the side rails and measure from the top to the point that matches your desired length. Please look at image number 2 and compare to your particular camper. Can you place the…

view full answer...

Answer 3

I reached out to the manufacturer, LaSalle Bristol, who told me the width measurement is the housing of the screen, so it is the entire unit. They did say the screens are between 1/8" and 1/4" narrower than the size says to account for…

view full answer...

Answer 4

The install of the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen #3441409775PBK consists of cutting the rails to the correct length to match door height, inserting the header into the rails and then using included screws to attach rails to…

view full answer...

Answer 5

If you measure just the width of your toy hauler's rear door opening I can determine which LaSalle Bristol CrossBreeze Screen you'd need. The part #3441409775PBK that you referenced is the correct screen if your opening is 97-3/4 inches wide.…

view full answer...

Answer 6

The LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screens do not use magnets to stay down. You simply need to pull the lanyard and you can actually stop it at any point of its length and it will automatically stop due to a mechanism in the…

view full answer...

Answer 7

Yes, the LaSalle Bristol CrossBreeze Screen, #3441409775PBK is attached to the inside wall of your toy hauler. The inside-wall-to-inside-wall measurement is what is crucial for fitment. For your RV, you provided a measurement of 98-1/2" so the…

view full answer...

Answer 8

The CrossBreeze is going to sit inside of the door opening on your toy hauler so you'll want to choose one as close to your opening width as possible. With your original header measuring 95" it's safe to assume you had the 96"…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...