Install Instructions for Replacement Pitch Arm Assembly # LC375994

Question

Question:

Do you have videos or tech support for the replacement of part number LC375994?

asked by: Doug D

0

Expert Reply:

I attached a picture I got from Lippert that has their install instructions and diagnosis page for the # LC375994 that you referenced.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have replacement pitch arms for the Solera 69 inch awning setups like what you have with the part #LC375994 which would be all that you'd need.

view full answer...

Answer 2

Yes, you are able to replace one of your awning arms. According to the tag you sent you will need the Replacement Support Arm Assembly #LC281154. This will allow you to replace either awning arm. You will be able to transfer the head off your current…

view full answer...

Answer 3

I believe you are talking about the head pin for the drive head, and there are replacement pins available, but it does depend on the specific awning you have, as the pins are for certain drive heads (we don't have a way of knowing what awning is…

view full answer...

Answer 4

It sounds like you're referring to the pitch arm for your awning. If that's the case then you'll need to measure your support arm, the wall mount portion in particular. The Replacement Pitch Arm for Solera XL Flat RV Awnings part #LC67VR…

view full answer...

Answer 5

We've got the video you're looking for! The link to this video is present on the product page for the Solera 69" Standard Flat Awning Support Arm, Black #LC281154, but I've also linked it to this answer as well. Rob does a great job…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Install Instructions for Replacement Pitch Arm Assembly # LC375994

Product Page this Question was Asked From

Continue Researching