Trailer Hitch Fit for 2020 Kia Telluride

Updated 09/07/2019 | Published 09/06/2019

Products Featured in This Question

Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs

(4000)

$31.12

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2640)

$14.23

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(408)

$250.45

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(1067)

$57.94

Question:

looking for a trailer hitch for a 2020 KIa Telluride. Your site comes up with Curt PN#13537. it doesn't look like it would line up with any of the mounting points. Do you have one that will fit?

asked by: Dave D

Expert Reply:

Hmm, I'm not sure how that happened, but the 13537 is not a fit for your vehicle, you'll want the # C13420. Curt has confirmed that the # C13420 is indeed a fit on a 2020 Kia Telluride, as you can see in the two install photos I've provided. In order to install the hitch, the spare tire needs to be removed and the exhaust lowered temporarily to allow easier access to the mounting points. As you can see if you look closely in the photos, the underside of the rear fascia also needs to be trimmed to the hitch will fit.

If you were planning on towing with your Telluride, you'll need a few other items to complete your towing system.

Trailer wiring harness, part # CU94FR (see link for an install video).
Ball mount, part # C45030
Trailer ball, part # 19260 for a 1-7/8 inch or # 63845 for a 2 inch ball