Replacement Trailer Jack for Shelby on 1993 Ranger Trailer Comanche 482V

Question

Question:

Need to find replacement for Shelby jack 1993?Ranger trail 482V

asked by: John K

0

Expert Reply:

What we have heard is that the Fulton # FTJ120W0301 uses the same style of mounting bracket as the Shelby jack that you have so it would provide the easiest replacement.

expert reply by: Jameson C

0

Answer 1

If your original Fulton jack is a snap-ring type swivel jack that uses the same 2.313-inch pilot hole diameter then Fulton 1200-lb jack #FTJ120W0301 should do the trick. You may not even need to bother with welding on the (included) new mounting…

view full answer...

Answer 2

Hello Jim, The Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K #FTJ120W0301 is rated for 1,200 pounds. Keep in mind that this rating applies to the tongue weight of the trailer, not the overall trailer weight. For…

view full answer...

Answer 3

I would love to help you upgrade to LED lights on your trailer but unfortunately, trailer manufacturers don't just give us a list with every light on the trailer for situations like this. If you can provide me with your full 17 digit VIN I would…

view full answer...

Answer 4

The Fulton Bolt-Thru Swivel Marine Jack, Weld-On #FXP15W is designed to mount to its mounting bracket with a single center bolt. The mounting bracket designed to work with this jack is part #P9012-00. In order to replace the weld-on jack on your boat…

view full answer...

Answer 5

Your best bet is going to be hardware kit #F0933325S00. The bolt is a 1/2 inch coarse threaded bolt with matching nut and bushing. But it sounds like the nut or bolt is backing out on your assembly. This could mean the lock washer is shot. You could…

view full answer...

Answer 6

What would work as a replacement for your Fulton 1,200 lb jack that I would recommend is the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301. In your pictures you did not include one that shows the bracket that attaches to your trailer mount,…

view full answer...

Answer 7

Based on the pictures you provided it looks like the mount on your 1999R71 Range trailer uses a jack very similar to the Fulton Bolt-Thru Swivel Marine Jack #FXP10W0301. You will need to confirm that this jack will be compatible by measuring the…

view full answer...

Answer 8

Hey Andrew! Since it is a bolt-thru you can use the Fulton Boat Trailer Jack w/ Wheel #F1411300301 as a replacement. This typically mounts on the #P9012-00 which is a 4-1/2" square bracket with pin holes 3" apart on center. If you don't…

view full answer...

Answer 9

I believe the jack you are looking for a replacement for is a frame mounted, swivel jack, sidewind, that has a 2,000 lb capacity and a wheel caster. We did have a customer come back and say that the Fulton jack part #FTJ120W0301 will attach just fine…

view full answer...

Answer 10

Hello John. After looking thru all of the snap-ring jacks we carry, I am sorry to say that we do not offer anything with a wheel that will also use a 1/2" pin. We do have a jack with a wheel and a snap ring that uses a 3/8" pin, the Fulton…

view full answer...

Answer 11

What you have there is a Dutton Lainson jack. There is no longer a direct replacement jack, but you can use the #DL22580 which will be an upgrade. This is a swivel jack with a 1,500 lb capacity and 12" of lift. This has dual wheels for easy…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Trailer Jack for Shelby on 1993 Ranger Trailer Comanche 482V

Continue Researching