Spare Tire Cover For ST205/750R15 Tire On Flat Bed To Stand Up To Sun

Question

Question:

Hi I am looking to cover my spare tire on my flatbed, I was looking at id # 052963751208 but it doesnt list my tire size which is ST205/750R15, it measures out at 26 1/2inch dia. Your chart lists that size only in a 14inch rim So before I order do you know if it will fit or is there another one better suited. I live in southern Nevada lots of sun and heat.

asked by: Kerry

0

Expert Reply:

I do have an option for your spare tire but the Classic Accessories Custom Fit Spare Tire Cover - Model 3 25-1/2"- 26 -1/2" Snow White part # 052963751208 does not fit the 15 inch wheel like you mention. The 205/75-15 trailer tires are actually 27 inches in diameter according to our trailer tire sizing chart.

I recommend the Adco Spare Tire Cover part # 290-1757 to cover the ST205/750R15 tire because of it's UV protective material. It also has vents on the top and bottom that allow moisture to escape which prevents dry rot.

expert reply by: Heather A

0

click to enlarge

Answer 1

What is your trailer tire size? We have great options for covers but I'd need to know the size so that we can determine overall diameter.

view full answer...

Answer 2

The size of the spare tire cover you need will depend on the overall diameter - or height - of the tire. For example, the Adco Spare Tire Cover #290-1737 is for tires that have a diameter of 27". So if you measured your tire and it was 27 inches…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hey Jesus! The #e98ZR comes with an alignment collar and a hitch pin. The Curt #C31006 does not include these and costs a little more. Outside of that, they are the exact same spare mount with different branding. What rig are you setting this up on?

view full answer...

Spare Tire Cover For ST205/750R15 Tire On Flat Bed To Stand Up To Sun

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching