Replacement Circuit Board for MaxxAir Roof Vent # 4900K

Question

Question:

Trying to locate a new circuit board for my model 4900k. Can you help me?

asked by: Patsy E

1

Helpful Expert Reply:

I sent all of your info and pictures to MaxxAir to find out what circuit board you'd need and they told me the board you need is the part # MA10A21275K.

expert reply by: Jameson C

1

Answer 1

Unfortunately, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K you ordered would not be the correct circuit board. The correct circuit board is the Replacement Printed Circuit Board for…

view full answer...

Answer 2

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 3

I reached out to MaxxAir for the Replacement Printed Circuit Board #MA10A21275K and any updates. The current C version has been updated with better resistors to better regulate both voltage and amperage. It does include a coating for corrosion…

view full answer...

Answer 4

The rain sensor itself on the MaxxFan Plus Roof Vent #MA00-04500K that you referenced is located at the far right corner away from the lid assembly on the fan. I have attached an image pointing out the sensor that you can check out as well. When the…

view full answer...

Answer 5

Yes! According to your provided numbers, you have the MaxxAir model 4700k. For that model, the part you need is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K. This is the same as the…

view full answer...

Answer 6

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 7

Since multiple MaxxAir Fans have the same features that you listed it's honestly best to first determine the exact model number you have before purchasing anything and end up not having it be compatible. I've listed below all the available…

view full answer...

Answer 8

This should not be an issue that will effect your MaxxAir Vent Fan. The voltage to the fan will really never be that high. It is typical to see those higher voltages when charging, but there will be enough voltage drop between the battery and the fan…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Circuit Board for MaxxAir Roof Vent # 4900K

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching