Replacement Bearings and Hub For 2007 EZ Loader Trailer Model With BT150A Oil Bath Hub

Updated 08/27/2019 | Published 08/26/2019

Products Featured in This Question

Replacement Race for L44643 and L44649 Bearings

(1279)

$4.66

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(664)

$5.37

CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased

(293)

$69.44

Replacement Trailer Hub Bearing - L44649

(2135)

$22.09

Question:

I have a 2007 EZ Loader Trailer Model EZWV-0-100 700 with a Hub BT150A Oil bath. Looking for a bearing and seal repair kit or also a complete Hub Kit. Hub is a 1-1/16 x 1-1/16 with 5 on 4.5 but perhaps can convert to grease only hub that will fit the same spindle.

asked by: Dan C

Expert Reply:

The EZ Loader with the BT150A Oil Bath hub uses a wheel bearing kit 300-020885 which includes wheel bearing part # L44649 for the inner and outer bearing, seal part # 34823 and race part # L44610.

From my research it looks like your hub is an idler hub, you can use CE Smith Trailer Hub Assembly part # CE13311 to replace your hub. This hub comes with the bearings, seal and race to fit your spindle and it is pre-greased. It is rated for 2,700-lb Axles so you do want to make sure your axle is not rated heavier than that. We do not have an oil bath hub that would fit the spindle.

expert reply by: Heather A