Brake Controller and 7-Way Recommendation for 2014 Subaru XV Crosstrek

Question

Question:

Good morning, We are considering pulling an Aliner Scout Lite with our 2014 non-hybrid Subaru Crosstrek. We have a Curt 13135 and standard 4 pin connecter already installed. The Aliner Scout Lite weighs 1180 dry and requires a 7 pin connector and electric break controller. Could you help me with which parts are appropriate? Thanks,

asked by: Stephanie

0

Expert Reply:

I can absolutely help you get the right parts so you can get camping in an Aliner Scout-Lite. Since you already have the Curt Trailer Hitch # C13135 and 4-Way such as # 118467 on your 2014 Subaru XV Crosstrek that leaves just the 7-way and brake controller, as you noted, and I'll give you a couple options.

The one I highly recommend is the Curt Echo Mobile Trailer Brake Controller # C51180 because of its simplicity. This controller just plugs into the 7-way and so long as you have a smartphone you just download the app to set it up and control it. The Echo pairs smooth braking with ease of use to make it the top brake controller for our customers; its convenience makes it really hard to pass up.

To use the Echo on your '14 Crosstrek you will need to install the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L.

If you want a budget-friendly option you will need to hardwire in a brake controller and for that I recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 which is a reliable unit that will give you effective braking at a great price. To install this controller you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, in order to comply with Curt's warranty for the #C13135 trailer hitch on your 2014 Subaru Crosstrek, you will want to use a stabilization strap like #18050. I have attached the installation instructions for the hitch. On the first page of…

view full answer...

Answer 3

The Draw-Tite Sportframe Trailer Hitch Receiver part #24935 does install between the the bumper cover and the bumper so the rear fascia does not need to be removed because it is a concealed cross tube hitch. The only part of the hitch that is visible…

view full answer...

Answer 4

Any trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and…

view full answer...

Answer 5

Hey Gevin, I looked up the install instructions for the B and W hitch RH660118BW #BW32PR and found that the torque spec for all of the bolts is 100 ft lbs.

view full answer...

Answer 6

Take a look at the back side of your existing 7-way trailer connector. There should be a round plug connected to the back of the actual trailer connector. You should be able to slide out the gray catch on that connector then remove it. That round…

view full answer...

Answer 7

Hey Bait, I did some research and it looks like the W211 that you have is the E-class so the Curt Trailer Hitch Receiver #C11701 you're looking at will work just fine. As long as you don't have the sport package, you can use this hitch. This…

view full answer...

Brake Controller and 7-Way Recommendation for 2014 Subaru XV Crosstrek

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching