What Is the Correct Rhino-Rack System For a Toyota Tacoma with Retrax XR Series Tonneau Cover

Question

Question:

Which Rhino Rack works for the t-slot on the Retrax Pro XR?

asked by: Paul S

0

Expert Reply:

The correct Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers that you will want to use on a mid-size truck like your Toyota Tacoma is part # RRVA165B-RRRLT600 which has 65" long crossbars. The part # RRVA180B-RRRLT600 which has 71" long crossbars will be used on full-size trucks like a Toyota Tundra.

expert reply by: Conner L

0

Answer 1

Rhino Rack has a couple of kits specifically designed for fitting the tracks of a RetraxPro XR Tonneau Cover. For 71" crossbars you will want the Rhino-Rack Vortex Crossbars for Retrax XR item #RRVA180B-RRRLT600 For 65" crossbars you will…

view full answer...

Answer 2

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 7

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

The good news is that neither of the browning nor the indentation were caused by anything you did or didn't do and that they're not as serious as you may think. The browning on your tire's sidewall is commonly referred to as "tire…

view full answer...

Answer 11

Hi Jeff! To be perfectly honest, there is no difference between them. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED72CR comes to us already put together to fit your 2017 Toyota Tacoma, whereas the Redarc Tow-Pro Liberty Brake…

view full answer...

Answer 12

Hey Trent! Yes, the Rhino-Rack Quick Mount Legs for Sportz Crossbars #RRRLT600 will fit the tracks on your Leer camper shell. These are compatible with Vortex crossbars so that will give you a complete roof rack. What will you be carrying?

view full answer...

What Is the Correct Rhino-Rack System For a Toyota Tacoma with Retrax XR Series Tonneau Cover

Continue Researching