How To Service Landing Gear Legs On a 5th Wheel Trailer
Updated 06/17/2019 | Published 06/14/2019
Products Featured in This Question
Question:
How do we get the leg out to repair or replace parts?
asked by: Brenda T
Expert Reply:
The easiest option to replace or repair any parts in a landing gear setup would be to couple the trailer to the tow vehicle as this would then support the front of the trailer so you can make repairs as needed. If you are asking what needs to be done once the weight of the trailer is off the landing gear; the first step is to unbolt the motor, disconnect the intermediate shaft, remove the gearbox, and then undo the bolt for the weld stop brackets. Once the bolt is removed the landing gears should be able to be slide out towards the vehicle. I have attached a list of repair parts for you below as well.
Lead Jack Repair Kit for Stromberg Carlson Landing Gear part # LG-146059
Follow Jack Repair Kit for Stromberg Carlson Landing Gear part # LG-146060
Replacement Motor for Stromberg Carlson Electric Landing Gear part # LG-142178
Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear part # LG-179015
Replacement Footpad and Pin for Stromberg Carlson Landing Gear part # LG-119225
Product Page this Question was Asked From
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 5001 - 6000 lbs
- Electric Jack
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
- Q&A: Replacement Landing Gear Follow Leg for 2003 Keystone Everest
- Q&A: Replacement Landing Gear for 1998 Carriage Carri-Lite RK 732
- Q&A: Best Dual Motor Landing Gear Replacement for a 2020 Forest River Wolfpack 365PACK16
- Q&A: Replacement Landing Gear for 2010 Open Range 5th-Wheel Trailer
- Q&A: Motor Kit Needed to Convert etrailer Landing Gear RVLG-8000 to Powered
- Q&A: What is the Distance Between Weld Stops on Stromberg-Carlson Landing Gear Set LG-1
- Q&A: How to Determine Correct Replacement Landing Gear For 5th Wheel
- Article: Trailer Jacks
- Article: Best Landing Gear
- Article: What Do I Need To Tow A Trailer?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps