Bail Clamp/U-Bolt Replacement Recommendation for Firestone Air Bag Kit on 2004 Ford F-350

Question

Question:

I recently oreded some replacements bail clamps I was focused on width and forgot about the length. I ordered the f3373 witch is width correct but 1 1/2 to short on threaded end. Can you help me with correct part to order ?

asked by: Raymond M

0

Expert Reply:

The correct bail clamp/u-bolt you need for your Firestone air bag kit on your 2004 Ford F-350 is the part # F3077 because the Firestone kit you have installed on your truck is the part # F2550. We have confirmed this with Firestone.

expert reply by: Jameson C

0

Answer 1

I went out to our warehouse to take a look at all of the Replacement Bail Clamps we currently have available for the Firestone Ride-Rite Air Helper Springs. For both the Replacement Bail Clamp #F3373 and #F3077, there is a distance between threaded…

view full answer...

Answer 2

The correct replacement bail clamp for a Firestone air bag kit part #F2597 is the part #F3077.

view full answer...

Answer 3

We do carry the replacement parts you need for the Firestone Ride-Rite Air Helper Springs #F2550 on your 2000 Ford F-250. - Replacement Bail Clamp for Firestone Ride-Rite Air Helper Springs #F3077 - Replacement Heat Shield for Firestone Ride-Rite Air…

view full answer...

Answer 4

I do have the mounting brackets you will want for your 2003 GMC Sierra 2500HD but you will want to have the Air Spring for Firestone Ride-Rite Kit part #F6781 in order for them to work for you as not all Firestone airbags are the same across kits. If…

view full answer...

Answer 5

Are you sure you have the 2400? The #F2400 is designed to fit the 2005-2007 models of the F-350. The correct kit for the 1999 is the #F2550 which uses the Replacement Bail Clamp #F3077. If you're sure it is the 2400 we do not carry the bail clamp…

view full answer...

Answer 6

I spoke with Firestone about this and the brackets of the #F2597 are a little different design but their capacity is still the same. Their recommendation was to go with the new kit because of the better design. If you decide to replace the brackets…

view full answer...

Answer 7

If the air bags are still in good condition from the Firestone Ride-Rite Air Helper Springs #F2550 on your 2002 2WD Ford F-250, then the replacement brackets and hardware for the Firestone Ride-Rite Air Helper Springs #F2400 for your 2007 4WD Ford…

view full answer...

Answer 8

Getting the correct spacers depends on what the distance between the upper and lower mounting brackets is. If the distance is 9-1/2" to 10-1/2" then you'll want to use #F2370 . If the distance is 8-1/2" to 9-1/2" then…

view full answer...

Answer 9

For the U-bolt part #F3373 the dimensions are: The outer width is 6-3/4" and the inner width is 6" The outer length is 4-3/4" and the inner length is 4-3/8" The length of the threaded portion is about 2 inches

view full answer...

Answer 10

Hey Wayne, since it looks like you have a 2006 Chevy Silverado the correct replacement bail clamp u-bolt would be the part #F3373.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Bail Clamp/U-Bolt Replacement Recommendation for Firestone Air Bag Kit on 2004 Ford F-350

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching