Which Lift Kit Fits 2010 Forest River R-Pod 172 with Lippert 3,500 Torsion Axle

Question

Question:

I have a Forest River 2010 rPod 172. It has a Lippert LC135-DTB-88.5-59.5-ID-ZERO-L-545 NV # 201331 GAWR 3500 What lift kit do I need ? Thank you

asked by: Jim H

0

Expert Reply:

For your 2010 Forest River R-Pod 172 that has 3,500 lb Lippert torsion axles the correct lift kit is the # LC382741 that you referenced which will give you a 3-1/2 inch lift.

expert reply by: Jameson C

0

Tim C.

11/26/2025

Hi Jameson-- LC382741, the lift kit you told Jim H would fit his Lippert 3,500lb torsion axle (answer updated 5/30/2019), is no longer available or searchable. Still available? Something else fit? Thanks! --Tim C

Jameson C.

11/26/2025

@TimC I wish we could still get that part number but we aren't able to and we don't have anything else similar that would work.

Answer 1

It sounds like you have a Lippert Diamond Torsion Axle and in which case you'd need the Axle Riser Kit part #LC270682 for a 2019 Forest River R-Pod 180. I took a look at some of the reviews for this kit and many were using this on the R-Pod so…

view full answer...

Answer 2

Due to the orientation of your axle, I believe you have a Lippert Diamond Torsion Axle. If your axle label confirms this, you'll want to use the Lippert axle riser kit, part #LC270682 which provides a 3-1/2 inch lift and is our only diamond axle…

view full answer...

Answer 3

The DexterTorflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01 has 8 inch on center holes, so if your Lippert 3500 torsion axle has the same spacing, it will be compatible.

view full answer...

Answer 4

I was able to identify your axle thanks to the tag you sent in and Dexter's help and found that the lift kit you'd need would be the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01.

view full answer...

Answer 5

The Torflex Lift Kit part #K71-707-01 is made from 7 gauge steel which is 3/16 inch thick. I attached a review video for this for you to check out as well for more info.

view full answer...

Answer 6

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

view full answer...

Answer 7

The 2017 Forest River R-Pod could use either the Axle Riser Kit - Single Diamond Torsion Axle part #LC270682 or Axle Riser Kit - Single Square Torsion Axle part #LC382741. It all comes down to what was installed at the factory which could have been…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Which Lift Kit Fits 2010 Forest River R-Pod 172 with Lippert 3,500 Torsion Axle

Continue Researching