Solution for MaxxAir MaxxFan that Clicks and Fan Won't Shut Off

Question

Question:

I have a fan that when it closes, it just keeps on going. it makes a clicking sound until it I raise it back up in order to stop it. I have to get something to stand on and manually crank it down. thanks,

asked by: KEN

0

Expert Reply:

Sounds like your roof vent lid isn't closing all the way when you ask it to which is why the fan isn't shutting off and also explains the clicking of the operator as it's trying to close it. In the past we've seen similar issues to this turn out to be fixed by replacing the operator with the part # MA10-20281K-1AF which is correct operator for your MaxxAir MaxxFan.

expert reply by: Jameson C

0

Answer 1

Hey Patricia, it shouldn't be that difficult to open the lid so I would look for something that's possibly interfering or a damaged component. Does the knob just turn or does it not want to move either? The operator mechanism part…

view full answer...

Answer 2

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 3

Yes, the Maxx Air vent covers will work just like the part #FVU1500WH that you referenced for your #FV802250. Your Maxx Air vent cover and the part #FVU1500WH are both designed to fit the same 14 by 14 inch roof vents.

view full answer...

Answer 4

It sounds like your MaxxAir MaxxFan Trailer Roof Vent has a powered lift like #MA00-04000K but has a connection issue. It is getting power for the lid to open and close but not for the fan function. I recommend testing your wiring using a circuit…

view full answer...

Answer 5

I spoke with my contact at MaxxAir regarding the issue you are having with your Deluxe Roof Vent #MA00-07500K. He said the dome not automatically lifting when starting the fan might be related to the temperature you have the unit set at for…

view full answer...

Answer 6

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Solution for MaxxAir MaxxFan that Clicks and Fan Won't Shut Off

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching