Can Timbren Suspension Enhancement Install on Truck with 3-1/2 inch Lift

Question

Question:

Will these work on a vehicle with a Ranch 3.5 “ lift ???

asked by: Rick

0

Expert Reply:

Timbrens like the part # TGMRCK25D can be installed on vehicles with lifts like your truck that has a 3.5 inch lift but you have to also buy spacers to take up the additional space created by the lift. Timbren spacers are sold in 1 inch increments and 1/2 inch increments. For a 1 inch spacer you'd need the # A25723-90AH00 and then for 1/2 inch part # TA25723-90AD00.

expert reply by: Jameson C

0

Answer 1

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 2

Hey Carlos, Yes, installing the Timbren Suspension Enhancement System #T45MR will affect your ride quality and handling while off-roading in your Tundra. These springs provide a cushion between your frame and axle so that the harsh bumps over rough…

view full answer...

Answer 3

Hi David, There is an option for bump stops for your 2024 Toyota Tundra with a 3-1/2 inch lift by using Timbrens, you'll just need a spacer kit and some extra spacers to go with it. So what you can use is the Timbren Suspension Enhancement System…

view full answer...

Answer 4

We do have the 1" Spacer #A25723-90AH00 which you could install on your Timbren Suspension Enhancement System #T45MR. Timbren does recommend having a 1" air gap between the bottom of the spring and the axle. This way it does not cause to…

view full answer...

Answer 5

Hey Mark, I recommend going with the kit you looked at, which is Timbren Suspension Enhancement System - Rear Axle #T45MR along with Spacer Kit #T68MR. If you had a camper on the bed, or had the rear end maxed out all the time, then I'd recommend…

view full answer...

Answer 6

The #AL24JQ will fit your lifted setup on your 2023 Toyota Tundra. However, I would not count on them for off-road use. I'm afraid they would not last and rip off of the end plates. It also would not be covered under their warranty if they were…

view full answer...

Answer 7

Yes, you can still use the Timbren Rear Suspension Enhancement System part #TDR1500DQ on your lifted 2014 Ram 1500 you just need to add the Timbren 1" Spacer For Raised Frame Vehicles part #TA25723-90AD00 to compensate for the lift. This spacer…

view full answer...

Answer 8

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 9

That's a cool set up you have there, and the best option for suspension enhancement for your 2022 Toyota Tundra is going to be Timbrens to help support the added weight in the rear. The correct part number for your '22 Tundra is the…

view full answer...

Answer 10

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...