Replacement Double Entry Step Motor for 2013 Tiffin Phaeton Motorhome

Question

Question:

I have a 2013 I Tiffin phaeton motorhome I need a new step motor I have a double step which is the right one to order

asked by: Donald Q

0

Expert Reply:

The Replacement Motor for Lippert Electric Coach Step # LC301695 is what you need for your double steps. Your coach will use the coach steps with the large gear instead of the gear box with a rotating arm, so this is the correct motor for that application. When removing the old motor, you will want to make sure you use the same spacers if they are present.

expert reply by: Jason S

0

Answer 1

Thanks Harley, the information you provided really helped. There isn’t a base plate available that’s confirmed to work with the Rugged Ridge XHD bumper on your Wrangler. I confirmed with the manufacturer of the manufacturer if this bumper can be flat…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…

view full answer...

Answer 6

There isn't a specific height from the trailer floor recommended to mount the E-Track. My gut feeling is that if 3 feet is too low and 4 feet is too high then 3-1/2 feet might be perfect. Another option is to mount E-track pieces vertically along…

view full answer...

Answer 7

We have the parts you're looking for! It looks like Ford is using the Redarc Tow-Pro Elite, part #RED44FR, as the brake controller for a 2020 Ford Ranger. If your Ranger has a factory 7-way, then the harness you need to install this brake…

view full answer...

Replacement Double Entry Step Motor for 2013 Tiffin Phaeton Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching