Are Rubber Pads on Quick Grip Mount Assembly # TH05738 Available Separately

Question

Question:

I need the rubber that covers the the grip assembly

asked by: Danny

1

Helpful Expert Reply:

The rubber pieces that are on the claws of the Replacement Quick Grip Mount Assembly # TH05738 aren't available separately so if yours are no longer there and you are wanting to replace them you will need a whole new mount assembly.

expert reply by: Jon G

1

Answer 1

Yes, the Fast Grip Clamp #TH94JV is compatible with aero-style bars. This is actually a replacement for Thule Pulse Rooftop Cargo Boxes like part #TH614 which fits crossbars with max dimensions of 3-5/16" wide x 1-1/2" tall. Don't…

view full answer...

Answer 2

The Thule replacement quick grip mount assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 1200 roof cargo box. See diagram to the right. The Thule quick grip mount #TH05738 will also work on Thule 1600 and 1800…

view full answer...

Answer 3

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 4

I do see the Quick Grip #TH05738 used on the discontinued Thule Atlantis 2100 cargo box will fit your 2015 Subaru Forester. The clamp opens the same amount as the Thule Force XT XXL Rooftop Cargo Box #TH6359B.

view full answer...

Answer 5

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 6

Hey Scott! The T-Track Adapter #TH27PQ will only replace the newer PowerClick Clamp #1401467300. Your Ascent cargo box came with the Quick Grip Mount Assembly #TH05738 so there isn't a T-Track Adapter for your box. Are you just looking for a…

view full answer...

Answer 7

I spoke with my contact at Thule who said that the only thing that was able to adapter your Thule Cascade roof box to aero style bars was the XADAPT10 adapter kit but that has been discontinued for quite awhile. At this point in time you either need…

view full answer...

Answer 8

Hello Joel, Since you’ve already ordered the T-track kit #TH27PQ, I think you’re going to be pretty happy with the change. The biggest win is that you won’t get those annoying pinch dents in your WingBar Evos, because the box mounts directly into the…

view full answer...

Answer 9

Hey Carter, thanks for reaching out! The Thule Motion 3 Rooftop Cargo Box #TH59PN does have the ability to secure directly to the T-Slots on crossbars if you get the T-Track Adapter #TH27PQ and swap it out with the PowerClick clamps and you'll be…

view full answer...

Answer 10

I have a solution for you. I confirmed with my tech at Thule that the T-Track Mounting Hardware for Thule Cargo Boxes #TH697600 will not fit your older Thule Ascent 1500 model cargo carrier. He also confirmed that there are no other t-slot adapters…

view full answer...

Answer 11

When it comes to attaching your Thule Ascent 1100 To the Thule Aero Blade Crossbars you will need. The Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 #TH05738 which will replace a damaged quick mount…

view full answer...

Answer 12

The easiest way to determine if the Thule Vector Alpine Rooftop Cargo Box #TH613501 will fit your 2021 Toyota RAV4 TRD Off-Road, is going to be to measure your crossbars. The Thule Vector Alpine Rooftop Cargo Box #TH613501 needs a crossbar spread…

view full answer...

Are Rubber Pads on Quick Grip Mount Assembly # TH05738 Available Separately

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching