Will the Stromberg Carlson 5th Wheel Louvered Tailgate Model # VG-97-2000 fit on a 2011 Ford F-250

Question

Question:

this tailgate came off my 1999 f 250 will it fit on a 2011 ford f 250 ???

asked by: ROGER

0

Expert Reply:

Yes, I spoke with my contact at Stromberg Carlson and she said that both the # VG-97-2000 and the # VG-97-4000 5th wheel louvered tailgates will fit on the 2011 Ford F-250.

I have added a link to all of the fifth-wheel tailgates we currently stock that will work on your 2011 Ford F-250.

expert reply by: Robert G

0

Diane

3/2/2025

Will a VG-97-2000 fit a 2005 Dodge Ran 1500?? Thanks!

Kate F.

3/3/2025

@Diane Hello Diane. Yes, the VG-97-2000 will fit your 2005 Dodge Ram 1500. We no longer carry that one though so I would suggest going with the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Dodge Trucks # VGD-02-4000. What kind of 5th wheel are you pulling? Any fun trips planned for the year?

Helpful Links

tv-install-stromberg-carlson-louvered-tailgate-2003-dodge-ram-pickup-vgd-02-4000.aspx

Diane

3/4/2025

@KateF is there away to find out what all trucks the VG-97-2000 will fit??

Kate F.

3/5/2025

@Diane There sure is Diane. I attached a link that will tell you all the vehicles the VG-97-2000 will fit. I take it you have one you are trying to sell?

Helpful Links

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.strombergcarlson.com/wp-content/uploads/2018/04/2000-series-endplate-fit-guide.pdf

See All (9) Replies to Diane ∨

Answer 1

Tom, It looks like that mounting bracket you're looking for has been discontinued because I wasn't able to find it through Lippert, I could only find it in a few places but they didn't have any stock. However, if you have the Vision S…

view full answer...

Answer 2

There aren't any trailer observation systems that are going to be able to display on your Garmin screen so you'd have to go with a kit that has a new monitor as well like the #FOS43TASF which comes with a 4.3 inch monitor. This is the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Will the Stromberg Carlson 5th Wheel Louvered Tailgate Model # VG-97-2000 fit on a 2011 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching