Does Tekonsha Primus IQ Brake Controller Manual Override Send Power to Pin With Trailer Disconnected

Updated 04/22/2019 | Published 04/20/2019

Products Featured in This Question

Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional

(2159)

$90.04

Hook Probe Circuit Tester

(60)

$13.03

Question:

will the primus iq controller supply voltage to the trailer brake wire if the trailer is not connected and the manual override is depressed/

asked by: Lynn

Helpful Expert Reply:

The Tekonsha Primus IQ # TK90160 will only send power to the 5 o'clock pin of your 7-way when it senses a connection on that pin. The trailer connected needs to read on the controller for the controller to send any power. When a trailer with brakes is connected there is a slight power draw on that pin that shows the controller there is a trailer with brakes connected. If you simply want to test this without a trailer you will need a circuit tester like # PTW2993 and connect that probe to the 5 o'clock pin of your 7-way. This will give a slight draw and will allow the trailer connected function so you can use that manual slide to increase the power output. The incandescent light will get brighter and brighter as you slowly adjust that manual slide.

expert reply by: Jason S